|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
05-09-2011, 02:49 PM
|
|||
|
|||
|
Check engine light = codes??
Autozone checked my codes.
Got P0404 & P0406 = EGR problems and a factory code they couldnt read of U110C anyone know what that is and whet to start looking for? Thanks, Alan 
|
|
#2
05-09-2011, 04:03 PM
|
|||
|
|||
|
Re: Check engine light = codes??
Quote:
P0404 Dodge EGR Position Sensor Signal Performance P0406 Dodge EGR Position Sensor Circuit High Input U110C Dodge Lost Fuel Level Message Has your fuel gauge been working???
|
|
#3
05-09-2011, 10:54 PM
|
||||
|
||||
|
Re: Check engine light = codes??
__________________
**We took the time to answer your post. Please give us some time and post the fix. It will help hundreds. **Follow prescribed safety practices before attempting any procedures. Doubts? Consult a maintenance manual. 07 Fusion / 06 RAV4 / 06 Accord / 96 Gr Caravan
|
|
#4
05-09-2011, 11:08 PM
|
|||
|
|||
|
Re: Check engine light = codes??
Quote:
its the larger of the engines.
|
|
#5
05-10-2011, 07:24 AM
|
|||
|
|||
|
Re: Check engine light = codes??
3.3 and 3.8 are virtually identical so there is no need to discriminate there.
U codes are body control codes. They are near impossible for a do-it-yourselfer to diagnose and repair. Normally, they require a dealer level scan tool and a good knowledge of advanced voltage testing to properly diagnose and repair. Most likely, there is either a bad wire or BCM. You could repair a bad wire yourself but the BCM would require VIN flashing and that takes a dealer scan tool or the van would go into theft mode. My two guesses are just that, guesses. This problem will need someone with a dealer level scan tool and proper tools.
__________________
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
