 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
02-20-2011, 08:32 AM
|
#1 | |
|
AF Newbie
Join Date: Apr 2008
Location: wichita, Kansas
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
|
96 Ranger Frozen rear end,won't move !
Last week the temp was -17.I warmed up my truck,put in gear (manual tranny) and it would not move,the rear end must have gotten water in via the breather tube at some time.As soon as the temp was above freezing I was able to drive the truck with no problem. I wan't to drain and fill with new grease,but I can't remove the plug. It is located on the right front side on the diff.and I can't find the correct allen wrench to get it out. Is there a ford tool needed,or does it take an odd size ? It is hard to see the plug . Thanks Bob in Wichita.
|
|
|
|
|
02-20-2011, 11:47 AM
|
#2 | |
|
AF Regular
Join Date: Dec 2004
Location: Fort Fraser
Posts: 164
Thanks: 0
Thanked 2 Times in 2 Posts
|
Re: 96 Ranger Frozen rear end,won't move !
You will need to pull the diff cover off to drain the oil , good time to check for metal flakes or chunks ,as for the fill plug , its just a 3/8 ratchet square
|
|
|
|
|
|
02-22-2011, 11:29 AM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Apr 2008
Location: wichita, Kansas
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 96 Ranger Frozen rear end,won't move !
Mac
Thanks for the quick reply,if it warms up this afternoon I will give it a go. Thanks again. Bob |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
