-
Grand Future Air Dried Beef Dog Food

Carnivore Diet for Dogs

Air Dried Dog Food | Real Beef
Go Back   Automotive Forums Car Chat > Engineering/ Technical
Register FAQ Community
Engineering/ Technical Ask technical questions about cars. Do you know how a car engine works?
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 06-30-2010, 03:35 PM
egartin egartin is offline
AF Newbie
 
Join Date: Jun 2010
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
P303 Misfire 2003 Hyundai Tiburon

I am getting a P303 misfire on our 2003 Hyundai Tiburion. Put in new spark plugs and wires. Same error code. Any advice or help would be greatly appreciated.

Thanks,

Eric
Reply With Quote
  #2  
Old 06-30-2010, 09:51 PM
shorod's Avatar
shorod shorod is offline
SHO No Mo
 
Join Date: Jun 2004
Posts: 10,996
Thanks: 105
Thanked 358 Times in 349 Posts
Re: P303 Misfire 2003 Hyundai Tiburon

Welcome to the forum! Does your 2003 Tiburon have Coil on Plug (CoP) or a coil pack? If CoP, try swapping the #3 coil for one of the coils on another cylinder and see if the misfire follows the coil or stays on the cylinder. If it follows the coil, then you probably have a bad coil. If it stays on #3, then closely inspect the fuel injector connection and wiring. If that looks good, confirm you have good compression on #3 cylinder.

-Rod
Reply With Quote
  #3  
Old 06-30-2010, 11:25 PM
egartin egartin is offline
AF Newbie
Thread starter
 
Join Date: Jun 2010
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Re: P303 Misfire 2003 Hyundai Tiburon

Thanks Rod. I will give that a try in the morning. Not sure what type of coil it has though. Is there an easy way to tell the difference?
Reply With Quote
  #4  
Old 07-01-2010, 07:26 AM
shorod's Avatar
shorod shorod is offline
SHO No Mo
 
Join Date: Jun 2004
Posts: 10,996
Thanks: 105
Thanked 358 Times in 349 Posts
Re: P303 Misfire 2003 Hyundai Tiburon

Yeah, if you have no spark plug wires and a coil mounted directly on the plug, you have Coil on Plug. If you have spark plug wires going from a central coil pack to the spark plugs, you do not. I suppose since you said that you put in new spark plugs and wires you do not have CoP, but some people are just so used to saying "plugs and wires" that they don't necessarily realize they're saying that.

-Rod
Reply With Quote
  #5  
Old 07-03-2010, 03:19 PM
egartin egartin is offline
AF Newbie
Thread starter
 
Join Date: Jun 2010
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Re: P303 Misfire 2003 Hyundai Tiburon

Okay switched 2 and 3 wires from the coil. Reset the codes and drove the car for few miles and same code appears P303 misfire on Cylinder 3.
Anything else I can try? Thanks again for your help.

Eric
Reply With Quote
  #6  
Old 07-07-2010, 01:43 AM
curtis73's Avatar
curtis73 curtis73 is offline
Professional Ninja Killer
 
Join Date: Nov 2002
Posts: 3,561
Thanks: 0
Thanked 10 Times in 10 Posts
Re: P303 Misfire 2003 Hyundai Tiburon

First thing would be to check the injector; both to see if its firing, and then to see if its delivering the proper fuel. If those check out, do a compression test. If cyl 3 is low, time for a rebuild or just pull the bulb for the engine light

Low compression could be from bad/cracked rings, blown head gasket, or poorly sealing valve, but start with the easier stuff first.
__________________
Dragging people kicking and screaming into the enlightenment.
Reply With Quote
  #7  
Old 07-07-2010, 02:36 PM
egartin egartin is offline
AF Newbie
Thread starter
 
Join Date: Jun 2010
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Re: P303 Misfire 2003 Hyundai Tiburon

Could I switch the injectors and see if the problem moves? What tools do I need to do a compression test?

Thanks for the help everyone. I hope I can get this fixed.
Reply With Quote
  #8  
Old 07-07-2010, 04:03 PM
Blt2Lst's Avatar
Blt2Lst Blt2Lst is offline
AF Enthusiast
 
Join Date: Jan 2007
Posts: 646
Thanks: 4
Thanked 5 Times in 5 Posts
Re: P303 Misfire 2003 Hyundai Tiburon

Quote:
Originally Posted by egartin View Post
What tools do I need to do a compression test?
A compression tester..

http://www.autozone.com/autozone/accessories/Actron-2-1-2-in-compression-tester/_/N-25j0?counter=1&itemIdentifier=87580_0_0_
__________________
1989 Caprice Classic Wagon, Olds 307 ,SMI Q-Jet, 200R4 w/Shift kit, Flowmaster 50, Hotchkiss sway bars, KYB Shocks. Jet Chip,
1989 Mustang LX 5.0 5sp convertible
1992 Camry LE 2.2
1996 Suzuki RMX250


I'm a victim of circumstance [
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Engineering/ Technical


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:33 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts