|
shifter cables
So I have had the plastic shifter base on my ZX3 break on me and I have replaced it. However I was still having the issues that the tranny cables were popping up and out of its clip. I thought I would remedy the situation with two 75# zip ties on each cable but now instead of popping up the pop forward and or backward. Do my cables need a lube or replacement or do I need to fab a metal bracket to secure them?
thanks for the help
V
__________________
So here we are. 77' 400 poncho, with 10 - 1 comp. Roller cam and rockers. 1 year later and its time to put the heads back on this bad boy. Est. 530 ponies. Follow the engine build.
|
Show Printable Version | 
Subscribe to this Thread
02-01-2011, 02:19 PM
