Quote:
Originally posted by CamaroSSBoy346
 Thats my expression right now. I tried a wasther for a cam gear; too big, so i scratch built my own. They fit, but not perfect. To access the cam gears, i had to take the top cover off (i had orgionally put some pieces of plastic under it to make it taller [this was before i decided to creat it turbo. But with the one side open, you could see the pieces of plastic, so i took them out. When i went to glue my top cover back on, it didnt clear the intake hose so.. i tried to bend the hose in a U shape, and it broke. DAM|\| IT TO H311! (Yes, i did say a few choice words when it broke) then the air cleaner, turbo, intercooler and intercooler piping ALL fell off... i finally got it together, but you cant even see the cam gears anyway AH!! ALL THAT HARD WORK FOR NOTHING!
|
Go to a hardware store and they'll have some little gear looking thingies that are about the same size as washers, but the problem is that they're too thin, so you stack a couple up, and you have yourself some cam gears! I hope this has helped.
