Quote:
Originally posted by JustinP10
Well, unless you are looking at building up a AWD primera i think you meant axles instead of driveshaft 
|
Actually, if you're going to be technical, both are wrong. Technically they are called halfshafts.
Quote:
Originally posted by JustinP10
Anyways to asnwer your question, the axles on the G20 and se-r are different. You could always use an SE-R transmission and run the beefier SE-R axles
|
No you can't.
Quote:
Originally posted by JustinP10
but I'm not sure how much work that would require. My guess is you would need to swap over the hubs too, and i'm not sure if that is possible, or how much work or fabrication that would entail (sp?). Hope this helps.
|
FWIW the SE-R halfshafts are no beefier. Remember, I have both an SE-R and a G20. Also, the CV joints can be interchanged. It would be easier to change them than the hubs, but there is no need.