I decided to build the same Honda Super Cub as my friend Macio but as the custom version
I will try to rebuild my Honda like this one
But I will not be reconstructed at the rear of the frame as was done in the above Honda. I stay with the standard version with a sprung rear wheel.
I started from the cut. This is I cut from my bike
but let's start from the beginning.
So it looks like a standard frame
I have to cut the engine mount and a box with air filter
after
I'll have to mill the excess material from the head cylinder.
I changed the front fork mount.
This is standard solution by Fujimi
I want to redo a mounting solution that is used Tamiya in most of their models of motorcycles
