Quote:
Originally Posted by maxwedge
You will be ok by keeping the coolant level up assuming it is just the w/p. A good how to can be found at autozone.com, repair guides, register and go to engine mechanical.
|
Well, I went to autozone before I posted and this is the only thing they say about supporting the block:
For 1992-95 vehicles, remove the torque axis mount, as follows:
- Use a suitable engine support fixture and lifting bracket to raise the engine slightly to take the weight off of the engine mounts.
It doesn't tell you where to put the supports and I don't want to damage anything. I have been told to keep it away from the oil pan and also two different storied on where I should put some 2x4 pieces of wood to brace. That is all I want to know so I don't cause any damage and to be able to replace the bolts into the mount and block flush as not to strip them, that's all. If anyone has any input on this, please write. Thanks.