Hello again,
one side is allready done.
There was a lot of stuff to do.The door did not really want to fit in the chassis.So i must use alot of putty.
In the middle of the door is a curb.This curb was 2mm to low to the frontfender.So i must use a lot of putty to make them look like a real car.
Also a big problem was the fitting of the door to the chassis.One side was ok,but the other side was a little to small.I use heavy file to make it big enough.
On this side is a lot of sanding still to do.
I wonder why on this side the curb looks pretty good?
The kit is really not one for a beginner.
Kind Regards
Christian
P.S: Maybee i stop this WIP,because im getting a Edai Grip Lotus 72 1/8 scale for restauration in a few days.This really big scale model has priority.