I own a 2001 Olds Alero. I did not pay close attention to the dash until about three weeks ago and I noticed that some of the lights weren't working in the dash. I had a relative open the dash. We found that some of the lights in the dash had been squeezed off. Probably for two reasons... (1) the dealer did not have to fix it and (2) sell the vehicle quicker. I bought a new dash and replaced the old one. The Anti-lock brakes, service vehcile soon, trac off, and brake lights all came on when the new dash was put in. Took the car to a dealer and had it hooked up to a scanner. The scanner threw codes for both front driver side and passenger side speed sensors and bearings were bad. Had both replaced then took it to the same dealer to have the computer reset so the codes would not show. The computer was reset and the lights came right back on showing the same codes in the scanner. Took the car home got underneath it and traced the wires from the hubs to the ABS motor. All look okay. What I was thinking is that maybe the ABS motor has failed??? Is there anyway to see if this is what the problem is? Or do I just go and replace it and hopefully it will work to turn the lights off? The back hubs are fine they both registered on the computer. Sorry for the long post I just wanted to get in all the details
. PLEASE HELP!!!