Quote:
|
Originally Posted by rlith
the 92-94 motors work fine in the ODBII version on the 95. (Running a 94 here in mine) You need to move the following .. Reluctor... Crank Sensor....Pull both pins on the 92-94 coming out of the bosses (a pair of pliers work fine)
|
The machining change in the crank (to accept reluctor) was a running change at the foundry (no part # change) in 1994. You got lucky in finding a 94 with the right crankshaft. A 92 or 93 will not accept the reluctor and will need a new crankshaft. The block casting was also changed in 94 to provide a wider flange fopr the plastic timing cover to seal better. so 92 and 93 blocks are not a good choice for OBD2 motor.