Quote:
|
Originally Posted by bluewhite4
After messing with it for an hour its deffinetly something with the pin switch. Or the pin switch is simply looking like the problem. Whenever the pin switches are out, the system seems to ground out. I could do the simple work around and just unhook the pins, but not sure I like the idea of losing my dome light ect. I guess at this point I'll have to try to find some place that specializes in electrical and have them take a look at it cause I couldn't find where it was grounding or why.
|
If you see a ground when the pin switches are out that may be normal. One side of each pin switch is normally connected to ground. A ground or no ground is what they supply to the control module or interior lighting, in your case, possibly the chime module.
See link below, Figure 23:
http://www.autozone.com/servlet/UiBr...3d800eda79.jsp