Moppie, the resistor pack is a separate thing located inside the evaporator box to keep it cool. It tests fine and controls 1-3. There is a relay that kicks on when you select 4 (or high) and just feeds 12v directly to the fan. So in this case, the switch just has four separate outputs all at 12v. It feeds each circuit into the resistor pack after the switch. I really need to test the switch, but I don't know which one is which yet. I'm hoping a buddy has his shop manual available to let me know the pinout. Sierrap615, I tested that circuit with the inline fuse and got full voltage. Its giving 12v to the game and its sourced from the horn relay, and the horn works
I did find a couple wiring diagrams today online that didn't really apply to my car, but they were a similar design. Armed with that knowledge I'm going to re-check some things today and get back to you guys.
Thanks for the help.