Quote:
|
Originally Posted by movin2stereo
I don't know what they are on.You need 2 pins and 4 bushings.After that story don't even deal with them.Go to NAPA,they carry the pins and bushings.The pins and bushings come in kits and are labeled for what they fit.1 kit has 1 pin and 2 bushings.The kits you need aren't labeled for the S10(if I remember right).They are labeled for a GM truck.The only difference is that the pin is longer which you can cut so that it is shorter.What I use for retainers are those thin star looking washers that when you press them on they will stick.I think NAPA can get you a spring also,which you will need a tool to put it on.Bending your hinges should be a last ditch,a final adjustment so to speak.Hope this helps.
|
I don't think there is a napa here but i'll check online and see then. I tried advance auto,o'reilys and autozone but had no luck.