|
Re: BCM Problem,I think
Did you actually measure what the draw is?Somewhere around 50 milliamps is pretty typical but I have seen Grand Cherokees with a little bit more.FYI,when you first turn the key off,it will be quite a bit higher,usually 200-300 milliamps but it should drop after less than a minute after all of the modules power down.As far as the mileage goes its burned into the bcm.I don't believe you can get a "new" bcm.I work at a dealer and all we can get are "reman" or exchange units.They come with the mileage already programmed.I'm pretty sure that there is no way to change it.If you did it would be odometer tampering which is kind of illegal
|