|
Re: 83 Civic Timing Belt Replacement
getting the bolt loose will be the worst of your problems. i would suggest finding someone with an impact wrench. if you can't do that get a long breaker bar, make sure you are in gear and have a friend push on the brake and hope that it doesn’t slip. the bolt is NOT a reverse thread as many assume it is, so don't get yourself all confused. once the bolt is loose the pulley should just slide off with a little encouraging
__________________
~Attention! if you are thinking about a D16A1 swap for your Civic/CRX and don't know where to start go Here. Thanks.~
|