Thread: Modifications
View Single Post
  #2  
Old 05-14-2001, 02:45 AM
JustinP10's Avatar
JustinP10 JustinP10 is offline
AF Enthusiast
 
Join Date: May 2001
Posts: 754
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via ICQ to JustinP10 Send a message via AIM to JustinP10 Send a message via Yahoo to JustinP10
check www.se-r.net.

They have a lot of info on engine modifications there.

I have these engine mods so far:

Hotshot Cold Air Intake
Hotshot 3rd Gen header
UR pullies (2 set)
Advanced timing to 19*
Lightened Stock Flywheel (about 13lbs)
ACT Clutch
recent tune up too (plugs, cap, and rotor)

I put down 141.1hp and 133.4 ft.lbs at the wheels a couple weeks back. These numbers are a tad higher than I've seen for others with the same mods, but i'm sure there are others with similar, or less mods making more power too. I think this equates to about 163hp and 154ft.lbs at the wheels ??? Hope this helps
__________________
Justin McClanahan
95 G20
15.4 @ 91.4mph (2.4 60ft )
143.7whp and 131.4 ft.lbs
Primera (10:1) Intake Cam, HS CAI, HS Header, UR Pullies, 19* Timing, ACT, Lightened Stock Flywheel, GC/AGX, Pacesetter Short Shifter, and more stuff...
Reply With Quote