Quote:
Originally posted by Phily
"if you get the cams, get the whole type-s valvetrain, including springs, retainers, valves, valve locks, and rockers"
so with all this
how much do you think it'll cost? 
|
about $1200, since you'll essentially be buying a fully loaded head.
your best bet... buy crower. the cams u can get from Nopi for $600 shipped. you can choose between stage 1 thru stage 3, they present no damage to the valvetrain. you can also get upgraded springs and titanium retainers from Crower that are about $440 for the set. best of all, the cams from crower, when matched with the spring and retainer set, will ensure your motor is safe to rev up to over 8000rpm. even with JUST the stage 2 cams on a stock setup, you can milk 15hp depending on your mods, before hitting the stock redline.
www.crower.com