View Single Post
  #2  
Old 06-29-2003, 04:48 PM
ci5ic's Avatar
ci5ic ci5ic is offline
worlds tallest midget
 
Join Date: Apr 2002
Posts: 6,212
Thanks: 0
Thanked 0 Times in 0 Posts
Re: check engine light means...??

Quote:
Originally posted by bionictony
the check engine light in my civic came on when i was driving on the highway at around 70mph. what could be wong? my car is at 141,000miles.. the oil has been changed and doesnt leak.. coolant is ok. radiator is new..

it lights up and stays on when i drive a couple of miles. what could be wrong? could it be the oxygen sensor or something? how would i be able to fix it?
When your check engine light comes on, your ECU will throw a trouble code... to find out what code it is, you have to pull back the carpet on the passenger side foot-well where the ECU is mounted. Then, you put the key in the ignition and turn it to the 2nd position (don't start the engine), and there's an LED mounted on the ECU that will blink. Count how many times the LED blinks and that is the code:

Code 1 (1 flash) Oxygen content

Code 3 or 5 Manifold absolute pressure

Code 4 (4 flashes) Crank angle sensor

Code 6 (6 flashes) Coolant temperature

Code 7 (7 flashes) Throttle angle

Code 8 (8 flashes) TDC position (top dead center) timing

Code 9 (9 flashes) No. 1 cylinder position (1.6L)

Code 10 (10 flashes) Intake air temperature

Code 12(12 flashes) No code 11 don't know why. Exhaust gas recirculation system

Code 13 (13 flashes) Atmospheric pressure

Code 14 (14 flashes) Electronic air control (EACV)

Code 15 (15 flashes) Ignition output signal

Code 16 (16 flashes) Fuel injector

Code 17 (17flashes) Vehicle speed sensor

Code 19 (19 flashes) No code 18 for some reason Lock up control solenoid valve

Code 20 (20 flashes) Electric Load
__________________
Reply With Quote