Our Community is over 1 Million Strong. Join Us.

Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Grain-Free, Zero Fillers


track times everyone?


nicks91civicsi
04-10-2003, 12:11 AM
sup all, iv got a zc with mostly bolt on mods, and im runnin a high 15 in the quarter, so i was just wonderin what some of you guys were runnin. not theoretically, but actual track times. im especially interested in other zc times especially if there are any turbo zc's.
thanks :)

Fishcat37
04-10-2003, 12:14 AM
not ZC powered - but time's in the sig. will get a more updated (and hopefully a lot faster) time on Weds. Had a shitty b16, no header, no msd, and a dizzy that had a seized bearing within 2 hours of running that time. that was on shitty street tires too. :cool:

Melt
04-10-2003, 12:16 AM
Probably low 17's :(

autoxef
04-10-2003, 01:08 AM
89 hatch zc greddy turbo kit 15 psi slicks=13.20 all day

SiZ
04-10-2003, 04:36 AM
15.0 Bone stock B16A.. I had a full interior, and my subs and shit with my 16"s on.. Next time will be much faster. :)

Civic Jim
04-10-2003, 04:47 AM
I think my 1.3 does it in about 13 minutes flat, LMAO

IM4U2NV81
04-10-2003, 08:22 AM
We don't have a local 1/4 mi. track but my best in the 1/8 is a 10.1 with a 2.2 60ft. That is with a D16Y8 w/o the vtec activated and no exhaust or anything like that. I am hooking up vtec this week with an MSD RPM activated switch. Hopefully I'll get down to a 9.9 with just that but a 10 flat would be ok. EVERYONE, please post 1/8 along with 1/4, should be on time slip.

sastanley
04-10-2003, 09:04 AM
Originally posted by autoxef
89 hatch zc greddy turbo kit 15 psi slicks=13.20 all day

What kind of work (if any) have you done to the inside of that motor? 15 psi is a lot of boost. 13.2 is fast too ;)

I ran 18.078 @ 73 with my stock d15b2. I have added an exhaust and CAI since then, but haven't been to the track to see if I can break into the 17's :eek:
I have a rebuilt ZC with a header ready to go in the car..then the plan will be to head to the track later this summer, and I'll have more details :cool:

jeef
04-10-2003, 10:32 AM
i don't think he's talking about 15 psi out of the turbo... i don't think a greddy will boost that high... i think he's talking about 15 psi in the slicks

88hondaowner
04-10-2003, 12:05 PM
16.1 in the ol dx hatchie..with h/i/e and 13in rims. redlined at 6800 lol

RedRacerCivic
04-10-2003, 12:56 PM
15.8 in my d16a6, mid 15s with tuning, low 15s with slicks+tuning.

mellowboy
04-10-2003, 12:58 PM
Originally posted by jeef
i don't think he's talking about 15 psi out of the turbo... i don't think a greddy will boost that high... i think he's talking about 15 psi in the slicks

Yeh i've been told they only handle 12 psi.

autoxef
04-10-2003, 09:56 PM
the zc is built with low compression pistons and shot peened rods, everything is balanced. my greddy boost meter reeds 1 bar (14.7 psi) when I hit hi boost on the profec, low boost is around 10 psi. I also have a friend with the same kit and it makes the same.

seth 90DX/ZC
04-10-2003, 10:01 PM
My naturaly asperated ZC will be in the same ball park ;) Low 13's to high 12's... My A6 ran a 15.8.... So I think some of the drivers here just suck ass. IMO :alien:

nicks91civicsi
04-10-2003, 11:29 PM
naturally aspirated zc in low 13's high 12's? you sure? what all you got done to it?

MyFirst4G
04-10-2003, 11:48 PM
Originally posted by seth 90DX/ZC
My naturaly asperated ZC will be in the same ball park ;) Low 13's to high 12's... My A6 ran a 15.8.... So I think some of the drivers here just suck ass. IMO :alien:

if you can get a ZC in the low 13's to high 12's i'll kiss your feet!

seth 90DX/ZC
04-11-2003, 12:31 AM
Originally posted by nicks91civicsi
naturally aspirated zc in low 13's high 12's? you sure? what all you got done to it?

11.2:1 pistons, copper head gasket 0.032, bored out to a 1.7L ,eagle rods, 58mm B18A tb, SS valves, WEB reground cams, JUN ADJ. cam gears, Mugen chiped PM7, DC header -Verry smooth port match job;), Aem Cai, new bearings everywere, msd, accell wires, custom tuned exaust, 10LB CM flywheel, ACT Heavy dutty presure plate - Unsure of what disc I will mate to it.... I think I am missing a few things... I have bought most of this stuff already and the block is almost done :)

autoxef
04-11-2003, 02:01 AM
my friend just droped a zc in his stock 91 hatch and ran a 14.9 on 13s no header stock exhaust with no muffler

seth 90DX/ZC
04-11-2003, 03:14 AM
I believe it, my hatch is also GUTTED... And when I am done it will be GUTTED to the extreme! Thats one thing you can do to your car thats cops cant fuck with you for. Goin with some FAL back windows, a fiberglass dash and a CF hood... I'll be in the LOW 13's no problem ;)

crxlvr
04-11-2003, 07:11 PM
i ran a 16.8 in my 4cy accord

SiZ
04-11-2003, 07:14 PM
Originally posted by seth 90DX/ZC
I believe it, my hatch is also GUTTED... And when I am done it will be GUTTED to the extreme! Thats one thing you can do to your car thats cops cant fuck with you for. Goin with some FAL back windows, a fiberglass dash and a CF hood... I'll be in the LOW 13's no problem ;)

Ya, we all should be mid twelves by that time too. :rolleyes:

crxlvr
04-11-2003, 09:43 PM
plexi windows are illegal on NY streets.

civickiller
04-11-2003, 10:52 PM
i should be in the mid 15s when i get my ls going

well im gonna gut my hatch and well see how fast it runs, then ill see if believe some of these times i here about

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food