Rear window defogger wire

I there a way other than soldering to reattach the rear window defogger wire to the rear window of a 2001 Tahoe? Soldering attempts by dealer have failed twice.

I used this product a couple of years ago to fix mine http://www.frostfighter.com/prt2000.htm

This was much better than the Permatex product in the local parts stores.

//2000CAYukon

I there a way other than soldering to reattach the rear window defogger wire to the rear window of a 2001 Tahoe? Soldering attempts by dealer have failed twice.

soldering is on some things very tricky...the dealership is not the place for this type of repair...find a person familiar with soldering electronic componets. or even a skilled plumber ...the use of a soldering flux is applied to the surfaces, then heating the materials with a hot soldering iron until the flux bubbles then apply the solder..have an assistant hold the soldered materials from moving until cool...then with this soldered put some 2 part clear epoxy on the repair to secure the wire joint to window allow to harden..

years ago I have used this silver adhesive as will as the spray material very nice ...very expensive the small can of spray 5OZ was 50.oo....