New Headlights Install

I recently bought some Halo Halogen headlamp assemblies for my 3.4L 2000 Impala. The store i bought it from said easy install, uses original wiring. It all fits, but when i plug the connectors together, there are still 4 wires hanging from the back of the assembly. One is white with a black stripe, one is Black, one is White with Black bands, and the other is Black with White bands. They are for the LED's and the "halos" that go around the headlight assembly, I just have no idea where to connect them to.

IIRC, You have to use wire taps and connect them to the Park wire that goes to the headlamp unit. (Yellow for park, and black for ground)

Do i tap the wire that goes from the headlamp to the connector? Or the wire that goes from the car to the connector? Also, the headlights only came with four taps, and there are four wires on each healight...

Do i tap the wire that goes from the headlamp to the connector? Or the wire that goes from the car to the connector? Also, the headlights only came with four taps, and there are four wires on each healight...

You can tap the wire from the car to the connector, but if you want to take the light off you will have to remove the taps. I don't personally have these, I just know a few people who do on another Impala site. So I don't know why they only send you 4 taps...