rear trailing arm help

question 1: on the front of the rear trailing arm, there is an arm that you adjust the wheel alignment. I need to know if that arm is the same size on a 91 civic dx and a 91 crx si. the si has rear disc and the dx has drums.

no matter what the answer, does anyone have an extra arm from a 91 crx si passenger rear trailing arm?

thanks

yes it will work. probably better than the teg's. just don't forget...the crx is shorter than the hatch. so you will need the teg e-brake cable. other than that, it's a direct bolt on.

you'd have better luck finding the teg set up then crx si....FYI

hmmmmmmm it is just the opposite around here ami. Hard to find a teg than a crx there are a ton of crxs up here. alot of them sis

Damn wish i had that problem, i never find any rex's around here...


gunnmen01

if you're referring to the camber bar, I have em (both sides), from an 88 DX. I replaced them with ingalls so the old ones are sitting in my garage...$20 plus shipping?

I think he actually means the arm at the front of the trailing arms that control the toe. That is the only factory part that is adjustable on our cars in the rear.

ic...

thanks, yeah the toe bar is what i'm talking about. I have 2 right rear ones from different hatches, but i put the arm from the crx on the left side and it aligned correctly. I didn't have the right rear toe arm from the crx, so i used my hatch one and it won't align, so i think the crx one is shorter.