Question about connectors

hey guys, I was going to try this mod...

http://www.automotiveforums.com/vbulletin/showthread.php?t=762051

But before I begin, I wanted to search the net for a connector opposite to the one that is currently in the car connected to the analog DIC. Reason being, I do not want to cut factory wires and want this mod to be easily reversable. Problem is, I cannot find anywhere I can order one. I cannot even find a website that sells a connecter for an analog DIC. I thought if i could somehow get the specs of it, I could order the exact opposite from mouser.com. Any ideas? Thanks!

GM sells that connector without leads (it's just the plastic part, no wires or metal connectors)

18way GM#12129406
24way GM#12125772

thanks richtazz, but im looking for the oppisite of the connector for the ananlog. Any idea how i could find something like that? That way i dont have to hack at factory wires.

you could always use splicers. they tap into a wire without ruining it. thats what i was planning on doing when i try this.

yeah, but splicers allow for moisture and corrosion to happen at the point where the insulation is broken.

If you're looking for a jumper harness to adapt from to the other, I doubt anyone makes such a thing. I'm sure you could find the pins and wire and custom make your own, but that would be tedious, and the wires would be individual, not held in a plastic snap connector.

yeak, ok. Thats what I kinda figured. first i need to find a DIC from a gt before i go any further, any ideas? Thanks guys!!!

I know that this thread is a little old, but if you go to Mouser's web site and do a search on the numbers above, you may find what you need. Mouser carries both the sealed and unsealed Delpi connectors. The prices are very reasonable.

tried it, even emailed tech support and they cant get it either. Thanks for the infor anyways!!!