How to replace insturment lights 2003 9C1
Dave6363
04-05-2007, 04:23 PM
Hello All,
I recently purchased a 2003 9C1 with 82,000 miles on the clock.
However, my fuel gauge does not light up with the rest of the instruments. I'm assuming it's just a bulb and was hoping somebody could tell me how to go about replacing it?
The car is otherwise pretty cool. The performance is a step up from my 93 Topaz. Only a little more thirsty, getting 23 MPG (if anyone is interested).
Any help on the light issue is greatly appreciated.
Thanks
DW
I recently purchased a 2003 9C1 with 82,000 miles on the clock.
However, my fuel gauge does not light up with the rest of the instruments. I'm assuming it's just a bulb and was hoping somebody could tell me how to go about replacing it?
The car is otherwise pretty cool. The performance is a step up from my 93 Topaz. Only a little more thirsty, getting 23 MPG (if anyone is interested).
Any help on the light issue is greatly appreciated.
Thanks
DW
troy1
04-07-2007, 01:49 PM
The bulbs are soldered to the clusters printed circuit board. So unless your mechanically and electronically inclined you can't do nothing but pull it out and exchange it. But if you are the T -1 bulb from radio shack from what I understand works great.
http://bbengineer.home.comcast.net/cars/impala/store.htm#Cluster
http://bbengineer.home.comcast.net/cars/impala/store.htm#Cluster
Automotive Network, Inc., Copyright ©2025