help with my vafc hook up for mini-me with pm6

i have a mini me swap all done and running...is a daily driver and i have to keep it below 3000 so i don't fuck my engine...so for now im gonna have my apexi vafc hooked up(power only) and keep it all obd-0 untill i can afford a p28, jumper and enything else that i need....so yess i will be doing that ..eventually1 but right now i need some help.!it runs good but better will be nice...but that will all be tuned to perfection...but before i bring it in to get done..i would like to have this vafc hooked up.---i have power ..as i took the red and orange and hooked them up to a main relay from the ecu(yellow/black) and the black and brown and hooked them up to a ground..from the ecu..i did them right how it said in the manual...but thats as far as i got...now i need to now were these wires left over from the apexi vafc go!!! like what colour wires and the purpose because i have looked at the pin-outs for a pm6 and i can't put enything together.....

-green-(rpm signal) Goes to what pin?
-Gray-(throttle signal)-?
-blue-(vtm signal input)...but do i have one?
-Purple-(vtec sol. input)-?
-pink-vtec sol. output)-?
-yellow-pressure signal output)-?
-white-pressure signal input)-?

These are the wires from the vafc that i don't know were they go..i am running with a stock pm6?
help would be awsome guys...thanks
oh the head is z6!

try the apexi website. they have simple diagrams that are easy to find out how to do everything. good luck

see thats the thing i have been to the website and i have downloaded the manual BUT it only has instructions on how to hook up a vafc to a vtec ecu ..like a p28...but i have a non-vtec ecu?? so i need to know how to kinda hotwire it...ya no what i mean...i have the pin-outs for my pm6 but i have know clue as to where the rest of the wires go, comming from the vafc????help?...in the meen time i am saving for a chipped p28 my buddie has and im looking for a 5th gen civic to cut the harness. and im gonna make my own adapter for the obd-0 to obd-1 swap....any good help would be really nice right now...thanks dudes~!and dudets!