91 CRX not starting

I am having difficulty trying to figure out how much ohms are supposed to be going thru the ignition switch. The car is not starting and I am thinking it is the ignition switch. The light on the ECU is not even showing up, I was trying to check the light on the ECU and it blinks for a second as I am turning the ignition on but it is not staying on.

the light on the ecu is supposed to just blink once then if there are error codes more blinks will follow the initial blink

have u checked ur fuses? grounds?

Don't forget about the Main relay...

first off ohms don't go through anything in a circuit they are a measurement of a physical aspect of the circuit. second, is it cranking? do u'r blinkers/wipers/blower motor any of the items that only function in the "on" position of the ignition switch work when u have it in the "on" position? if it cranks and any of those items work, then it's not the ignition switch. if u have had the underdash fuse box out, check and make sure u have ALL of the connectors plugged back in, especiall in the back. the power to your dizzy comes from the back of the underdash fusebox. have u done any of the usual diagnosis of a no start? check for spark? check for fuel? check compression? let us know wut the car is doing, wut u'r doing, and wut u have done.