Head Swap

Alright, i have one question, will a 95 DOHC head fit on a 94 DOHC block? Ive searched and found nothing, so all the help i can get it great, thanks. :)

Ultimate Swap Guide (http://www.turbosaturns.net/forum/viewtopic.php?t=2211)

The info for 95 heads is a bit confusing. From just a quick read of the guide, I'd say no, but not sure.

the head will fit on any saturn block thats a 1.9

Yea, I read up on it a little more and found that out, thanks :)

What about the different EGR valves? Easy adaptation?

Well, if you put the 95 head on the 94 block, the egr system wont matter because the system is on the head, not the block, as far as i know, someone correct me if i'm wrong.

all 95s use a electronic EGR, 94s used ether a vaccum or electronic EGR, depending on what state the car was bought in. if the 94 has a electronic EGR, there is no problem. if the 94 has a vacuum EGR, the swap will only work if the PCM and wiring harness are replaced

the motor is from a 94 and going into a 95, so the head switch would be fine.