V6's... fun
Pages :
[1]
2
Savage Messiah
03-04-2006, 06:38 PM
hehehe... V6 plus 17 psi = pretty quick
He went:
ET-12.0360
MPH-112.56
Then:
ET-12.4308
MPH-115.74
Then:
ET-13.1
MPH-110
Then:
ET-13.4
MPH-107.55
His #'s:
Best Dyno: 456 RWHP and 509 RWTQ
His site:
http://www.turbov6camaro.com/home.htm
MOTOR
Diamond coated piston 8.5:1 c/r w/rings and wrist pins
Forged L32 2004 GTP Connecting Rods
ARP studs, bolts ect.
Intense racing head gaskets
Comp Cams custom grind,
Comp cams Hydraulic Roller Lifters
Comp cams 130lb springs
Comp cams titanium retainers
Comp cams push rods
Cam install kit w/timing chain
Clevite 77 TriMetal Main Bearings
Clevite 77 TriMetal Rod Bearings
Clevite 77 TriMetal Cam Bearings
Oil PSI kit to 80 PSI at WOT
New oil pump kit
Mobil 1 15w50 & K&N Oil filter
PCM
HP Tuners PCM Programmer with EIO
Greddy Black Profec B-Spec II electronic boost controller
FUEL
57 lb/hr injectors
Walbro In tank Pump 255 LPH
Induction
T-70 Force Fed Fabs Turbo kit
Master Power Super 70 Trim .70 cold/.68 hot "P" Trim
Race port/polish heads with 5/3 angle valve job
K&N air filter
Exhaust
Pacesetter headers
Ignition
MSD Custom Wires
MSD Blaster coils
Transmission (swapped out the broken 5 speed)
Rossler Stage II 4L60E
Precision Industries TQ Converter
3800 Stall with 2.5TM
Drive Train
Prothane Tranny Mount
Z28 Rear End/axles/brakes
LS1 1 piece Drive Shaft
Eaton carrier With 3.42's
MAC Cover to help hold the rear in one piece.
Mobil 1 Tranny and rear-end fluid.
Mickey Thompson Et Drag Radials 255/50-16 on stock Firebird wheels
Suspension
KYB AGX 8 way Adj. shocks on front and rear
New rear springs
Spohn 8 point roll bar. (Door bar's not installed yet)
Spohn LCA w/install
http://www.fullthrottlev6.com/forums/showthread.php?t=14700
fun stuff!!!!
He went:
ET-12.0360
MPH-112.56
Then:
ET-12.4308
MPH-115.74
Then:
ET-13.1
MPH-110
Then:
ET-13.4
MPH-107.55
His #'s:
Best Dyno: 456 RWHP and 509 RWTQ
His site:
http://www.turbov6camaro.com/home.htm
MOTOR
Diamond coated piston 8.5:1 c/r w/rings and wrist pins
Forged L32 2004 GTP Connecting Rods
ARP studs, bolts ect.
Intense racing head gaskets
Comp Cams custom grind,
Comp cams Hydraulic Roller Lifters
Comp cams 130lb springs
Comp cams titanium retainers
Comp cams push rods
Cam install kit w/timing chain
Clevite 77 TriMetal Main Bearings
Clevite 77 TriMetal Rod Bearings
Clevite 77 TriMetal Cam Bearings
Oil PSI kit to 80 PSI at WOT
New oil pump kit
Mobil 1 15w50 & K&N Oil filter
PCM
HP Tuners PCM Programmer with EIO
Greddy Black Profec B-Spec II electronic boost controller
FUEL
57 lb/hr injectors
Walbro In tank Pump 255 LPH
Induction
T-70 Force Fed Fabs Turbo kit
Master Power Super 70 Trim .70 cold/.68 hot "P" Trim
Race port/polish heads with 5/3 angle valve job
K&N air filter
Exhaust
Pacesetter headers
Ignition
MSD Custom Wires
MSD Blaster coils
Transmission (swapped out the broken 5 speed)
Rossler Stage II 4L60E
Precision Industries TQ Converter
3800 Stall with 2.5TM
Drive Train
Prothane Tranny Mount
Z28 Rear End/axles/brakes
LS1 1 piece Drive Shaft
Eaton carrier With 3.42's
MAC Cover to help hold the rear in one piece.
Mobil 1 Tranny and rear-end fluid.
Mickey Thompson Et Drag Radials 255/50-16 on stock Firebird wheels
Suspension
KYB AGX 8 way Adj. shocks on front and rear
New rear springs
Spohn 8 point roll bar. (Door bar's not installed yet)
Spohn LCA w/install
http://www.fullthrottlev6.com/forums/showthread.php?t=14700
fun stuff!!!!
Rally Sport
03-04-2006, 07:03 PM
Thats pretty badass.
Genopsyde
03-04-2006, 07:59 PM
why was he getting slower each pass?
stone_mound_camaro
03-04-2006, 08:48 PM
If my Camaro did that, the girls would be on me like salt on a peanut.... Hells Yea...
Genopsyde
03-04-2006, 09:08 PM
hells yea
Morley
03-04-2006, 09:30 PM
Put that same money into a V8 and drop the times by a third.
Rally Sport
03-04-2006, 10:07 PM
Put that same money into a V8 and drop the times by a third.
You know, I was thinking the same thing..
You know, I was thinking the same thing..
Mr. Luos
03-04-2006, 10:39 PM
He went:
ET-12.0360
MPH-112.56
Then:
ET-12.4308
MPH-115.74
Then:
ET-13.1
MPH-110
Then:
ET-13.4
MPH-107.55
His #'s:
Best Dyno: 456 RWHP and 509 RWTQ
115 MPH with 456 RWHP?? :nono:
That car has NO powerband...just a nasty peak.
380 RWHP can net 115 MPH on a lighter F-Body.
ET-12.0360
MPH-112.56
Then:
ET-12.4308
MPH-115.74
Then:
ET-13.1
MPH-110
Then:
ET-13.4
MPH-107.55
His #'s:
Best Dyno: 456 RWHP and 509 RWTQ
115 MPH with 456 RWHP?? :nono:
That car has NO powerband...just a nasty peak.
380 RWHP can net 115 MPH on a lighter F-Body.
Savage Messiah
03-04-2006, 10:40 PM
why was he getting slower each pass?
click the link at the bottom of my post...
http://www.fullthrottlev6.com/forums/showthread.php?t=14700
Then i soon relized that my exhuast leak was back under idle my WBO2 was peged at 17:1 this affects spool ALOT and i could ony nail 2.3 60 foots again
click the link at the bottom of my post...
http://www.fullthrottlev6.com/forums/showthread.php?t=14700
Then i soon relized that my exhuast leak was back under idle my WBO2 was peged at 17:1 this affects spool ALOT and i could ony nail 2.3 60 foots again
Savage Messiah
03-04-2006, 10:51 PM
115 MPH with 456 RWHP?? :nono:
That car has NO powerband...just a nasty peak.
380 RWHP can net 115 MPH on a lighter F-Body.
http://www.turbov6camaro.com/dyno.htm
http://www.turbov6camaro.com/dyno/456.MOV
http://www.turbov6camaro.com/dyno/run.pdf
you, you're right :iceslolan
That car has NO powerband...just a nasty peak.
380 RWHP can net 115 MPH on a lighter F-Body.
http://www.turbov6camaro.com/dyno.htm
http://www.turbov6camaro.com/dyno/456.MOV
http://www.turbov6camaro.com/dyno/run.pdf
you, you're right :iceslolan
Genopsyde
03-04-2006, 10:53 PM
ah, i see now, I just didn't wanna read to find it.
Savage Messiah
03-04-2006, 10:53 PM
Put that same money into a V8 and drop the times by a third.
Right and be where 3987498023 other people are having the same mods as that many other people.... that's no fun.
Someone's just mad because theyd lose to a v6...
Right and be where 3987498023 other people are having the same mods as that many other people.... that's no fun.
Someone's just mad because theyd lose to a v6...
Genopsyde
03-04-2006, 10:55 PM
eff that, put a V12 in it.
Mr. Luos
03-04-2006, 11:06 PM
Someone's just mad because theyd lose to a v6...
Me??? :banghead:
Me??? :banghead:
Rally Sport
03-04-2006, 11:51 PM
Right and be where 3987498023 other people are having the same mods as that many other people.... that's no fun.
Highly doubt that, first off.. thats alot of car enthusiasts making ALOT of money to throw onto a V8.. thats also saying that its a v8 and also I dont even think that many Camaros were sold all together, let alone v8s..
Highly doubt that, first off.. thats alot of car enthusiasts making ALOT of money to throw onto a V8.. thats also saying that its a v8 and also I dont even think that many Camaros were sold all together, let alone v8s..
FireFox05
03-04-2006, 11:59 PM
Me??? :banghead:
Think he meant Morley, not you Lous.
Think he meant Morley, not you Lous.
666_speed
03-05-2006, 12:28 AM
pffft...my 3.8 > luos
Genopsyde
03-05-2006, 12:33 AM
lol
Mr. Luos
03-05-2006, 01:28 AM
pffft...my 3.8 > luos
Curtis....Bitch. :wink:
:rofl:
Curtis....Bitch. :wink:
:rofl:
stone_mound_camaro
03-05-2006, 01:28 AM
*ahem* L32<<<<<
Mr. Luos
03-05-2006, 01:42 AM
Ouch.
I think.
I think.
Savage Messiah
03-05-2006, 03:51 AM
Definately ouch... the n/a 3.4 (L32) record was just broken the 27th of feb and is now [email protected], 2.25 60'. Power adder record for L32 is 13.5 with a turbo... dont know trap speed, 60' or anything else off hand tho.
Morley
03-05-2006, 04:51 AM
Someone's just mad because theyd lose to a v6...
I wouldn't bet the farm on it. 12's & 13's is not fast, especially for a force fed engine.
I wouldn't bet the farm on it. 12's & 13's is not fast, especially for a force fed engine.
stone_mound_camaro
03-05-2006, 05:25 AM
Definately ouch... the n/a 3.4 (L32) record was just broken the 27th of feb and is now [email protected], 2.25 60'. Power adder record for L32 is 13.5 with a turbo... dont know trap speed, 60' or anything else off hand tho.
Heartbreaker....
Thats the most i can expect?! :banghead:
Heartbreaker....
Thats the most i can expect?! :banghead:
cuda_dude
03-05-2006, 11:24 AM
Right and be where 3987498023 other people are having the same mods as that many other people.... that's no fun.
Someone's just mad because theyd lose to a v6...
That's the same thing all of the civic(etc) drivers say.....
Someone's just mad because theyd lose to a v6...
That's the same thing all of the civic(etc) drivers say.....
Savage Messiah
03-05-2006, 02:00 PM
But their cars are ugly and were never intended for performance
Savage Messiah
03-05-2006, 02:08 PM
BTW cut your mullets morley and marcus you redneck bahstads :D
Morley
03-05-2006, 03:46 PM
BTW cut your mullets morley and marcus you redneck bahstads :D
Sonny Jim, I do not now, nor have I ever had a "mullet". And the only way my neck is ever red is from sunburn.
Sonny Jim, I do not now, nor have I ever had a "mullet". And the only way my neck is ever red is from sunburn.
Savage Messiah
03-06-2006, 10:44 AM
so just wondering what that BEASTLY heads, cam, bolt ons 350 runs.
drvngstorm05
03-06-2006, 11:00 PM
so just wondering what that BEASTLY heads, cam, bolt ons 350 runs.
faster than that v6 on 17psi haha
faster than that v6 on 17psi haha
Rally Sport
03-06-2006, 11:11 PM
faster than that v6 on 17psi haha
:rofl: Thats funny.
:rofl: Thats funny.
FireFox05
03-06-2006, 11:27 PM
Great stuff.
Dyno247365
03-07-2006, 12:01 AM
Is that the Turbo Buick V6?
drvngstorm05
03-07-2006, 02:31 AM
no that's a different type of 3.8... its the same v6 that is used in the fwd gm cars...
Morley
03-07-2006, 04:05 AM
so just wondering what that BEASTLY heads, cam, bolt ons 350 runs.
Faster than an LT1
Faster than an LT1
drvngstorm05
03-07-2006, 05:40 AM
Faster than an LT1
hey now what's that supposed to mean?
hey now what's that supposed to mean?
Rally Sport
03-07-2006, 09:28 AM
^ :uhoh: Im staying out of this one.
Link85x
03-07-2006, 09:51 AM
This is getting good!!!!!!!
Morley
03-07-2006, 04:07 PM
hey now what's that supposed to mean?
It means that my friend at work is very unhappy with me and is looking for ways to boost his LT1's power.
It means that my friend at work is very unhappy with me and is looking for ways to boost his LT1's power.
Mr. Luos
03-07-2006, 06:07 PM
Can I play?
Savage Messiah
03-07-2006, 08:15 PM
Faster than an LT1
that's not saying much.... :grinno:
...
:uhoh:
that's not saying much.... :grinno:
...
:uhoh:
97cavalier
03-07-2006, 09:03 PM
the lt1's have SO MUCH potential!
drvngstorm05
03-07-2006, 10:03 PM
if you buy me a 396 lt1 then yes you can play :icon16:
Mr. Luos
03-07-2006, 10:09 PM
if you buy me a 396 lt1 then yes you can play :icon16:
Why I gotta pay for it? :lol:
Why I gotta pay for it? :lol:
97cavalier
03-07-2006, 10:21 PM
because you are the one stealing all the money from that little kids at the school.lol
drvngstorm05
03-07-2006, 10:30 PM
ya u bully lol
Mr. Luos
03-07-2006, 10:36 PM
drvngstorm05
03-07-2006, 10:37 PM
you're the owl who ate my candy!!!!
Genopsyde
03-07-2006, 10:41 PM
that has got to be the greatest owl compilation ever made.
Morley
03-07-2006, 11:58 PM
that's not saying much.... :grinno:
...
:uhoh:
Lets see you run against one.
Oh, and his isn't stock, but not sure on his power output.
...
:uhoh:
Lets see you run against one.
Oh, and his isn't stock, but not sure on his power output.
Morley
03-08-2006, 12:11 AM
Can I play?
Once this is installed..come on down http://www.rpmoutlet.com/atifbodytp.htm
Once this is installed..come on down http://www.rpmoutlet.com/atifbodytp.htm
drvngstorm05
03-08-2006, 01:01 AM
shit he couldn't take me, let alone your buddy... with exception of that first v6 run... i could take that sixer...
Morley
03-08-2006, 01:18 AM
shit he couldn't take me, let alone your buddy... with exception of that first v6 run... i could take that sixer...
Yeah, the hotter he gets the slower he runs.
Yeah, the hotter he gets the slower he runs.
Mr. Luos
03-08-2006, 08:18 AM
Once this is installed..come on down http://www.rpmoutlet.com/atifbodytp.htm
Probably make it real close.
What kinda power are you looking for with it?
Probably make it real close.
What kinda power are you looking for with it?
Link85x
03-08-2006, 09:36 AM
Mr. Lous, i want my milk money back!!!
Morley
03-08-2006, 01:23 PM
Probably make it real close.
What kinda power are you looking for with it?
Should be right around 500 at the crank.
What kinda power are you looking for with it?
Should be right around 500 at the crank.
Mr. Luos
03-08-2006, 06:17 PM
Should be right around 500 at the crank.
Better be much lighter than me. :wink:
Looking for 500 at the wheels with mine. :evillol:
Better be much lighter than me. :wink:
Looking for 500 at the wheels with mine. :evillol:
drvngstorm05
03-08-2006, 08:06 PM
3rd gens ARE lighter :owned:
Mr. Luos
03-08-2006, 08:11 PM
By 700 pounds?? :wink:
drvngstorm05
03-08-2006, 08:21 PM
no! by like 900!!!
900 minus 700 i mean... :icon16:
900 minus 700 i mean... :icon16:
Automotive Network, Inc., Copyright ©2026