94 Blazer Gasket Issues
Pages :
1 [2]
yesimsteve
02-20-2006, 01:50 PM
Turn your motor by hand til your number 1 piston is top dead center. If you put your rotor on. It should be pointing to number 1 position. Starting with number 1. moving counter clock wise count 2, 3, 4, 5, 6, and place the wires to your plugs. Driver side is odd 1, 3, & 5. Passenger side is even 2, 4, & 6. Hope this helps.
so i put the spark plug wires onto the distributor cap clockwise in the firing order 1,6,5,4,3,2?
and then i put them onto the heads driver side odd and passenger side even?
so i put the spark plug wires onto the distributor cap clockwise in the firing order 1,6,5,4,3,2?
and then i put them onto the heads driver side odd and passenger side even?
Gabe25
02-20-2006, 04:27 PM
so i put the spark plug wires onto the distributor cap clockwise in the firing order 1,6,5,4,3,2?
and then i put them onto the heads driver side odd and passenger side even?
Yes, Just so you don't get confussed. Do one at a time, attach your wire to the distributor. The other end to the spark plug. You can go back and dress it up after.
and then i put them onto the heads driver side odd and passenger side even?
Yes, Just so you don't get confussed. Do one at a time, attach your wire to the distributor. The other end to the spark plug. You can go back and dress it up after.
Automotive Network, Inc., Copyright ©2026
