Sohc ZC probs/questions

So i just put a sohc in my 1990 std hatch. It previosly had a dohc zc but spun a bearing twice. Anyways i put the motor in and realized that the driver side motor mount does not fit. Then i noticed the ditibutor plugs were different. This led me to believe that the motor is an obd1 version. So i put my old obd0 injectors in but the obd0 distributor mount holes are different. So what can i do to make this work? Can I put a 92-95 civic drivers side mount on it and drill and tap new dizzy holes? Any help is extremely apreciated.

stock 4th gen mounts should work and dont drill holes that would be bad...you can use big washers to hold the dizzy down if u get how im tryin to describe it...there is a post if u search with pics of the dizzy mounted usin washers

So i just put a sohc in my 1990 std hatch. It previosly had a dohc zc but spun a bearing twice. Anyways i put the motor in and realized that the driver side motor mount does not fit. Then i noticed the ditibutor plugs were different. This led me to believe that the motor is an obd1 version. So i put my old obd0 injectors in but the obd0 distributor mount holes are different. So what can i do to make this work? Can I put a 92-95 civic drivers side mount on it and drill and tap new dizzy holes? Any help is extremely apreciated.
dude is your sohc zc motor similar to this one (http://cgi.ebay.com/ebaymotors/1988...Q cmdZViewItem) couse im also thinking of changing my dohc zc for the sohc zc vtec. i trying to figure out if the sohc motor will just drop in to my 89 hb without having to chane stuff