question about HAsport mounts

I did a LS swap with some no-name mounts and I am having problems with the motor sitting correctly.
My question is, do any of you that used Hasport mount have any problems like, hitting the hood, vibration through out the car from the motor, shit like that. let me know, thanks.
-Mike

Im using place racing mounts and my hood just barely hits my valve cover, but the motor sits nicely.
What are the problems you are having? and how bad are they?

we have hasport mounts...the valve cover rubbed on the hood big time. a USDM spec JDM style CF hood solved that problem :grinno:

we just did 90civicrider's b16 swap and used AVID mounts, his hood didn't hit or rub...which we were worried about as his engine bay and hood had been freshly painted (during swap time) to match his exterior orange.

edit: after seeing the mounts in his car, our shop now carries AVID mounts :naughty:

i used hcps cleared everything fine, no vibrations, i really liked em. Did you bend down the lip on the rear crossmember in front of the rear tranny mount? if not that could be your vibration problem.

I used Enjo and they worked GREAT!!!

HCP motor Mounts here and No problems at all even sprung for the Throttle cable adaptor too.

no vibration, clears everything, not axle bind or stuff like that.

HCP + two thumbs up.

Avid Mounts All The Way !!
Still no rubbing issues on the hood!
And they match :smokin::smokin:
http://memimage.cardomain.net/member_images/9/web/129000-129999/129046_145_full.jpg

HCP motor Mounts here and No problems at all even sprung for the Throttle cable adaptor too.

no vibration, clears everything, not axle bind or stuff like that.

HCP + two thumbs up.


I agree, I got my whole swap from HCP. No probs with clearance or anything, unless you count puttin the whole swap in the back of my hatch. :screwy:

Kunundrum, did you get the 3 or 4 mount set? I have the 3 mount, it has some vibration, but I was expecting that.

i got the 3 pc hcp mount kit no vibrations at all. basically you would think the car is stock as far as vibrations go.

well basicly, the alt. pully was rubbing on the chassis, something is hitting on the pass. side. and I can't plug my VSS in, the rear motor mount, the way it's designed, it ends up right over it. The other thing that concerns me is, if I change the mounts at this point, will my linkage still be the correct lenth. it was cut and extended, to work correctly.
Thanks for all the info. is there any site to look at and purchase these mounts you guys are suggesting? I would like to look into these avid mounts.

-Mike

you have aim, yahoo, or msn???

http://www.jazzproparts.com/photos/AVID%20AC%20MM%20001-2.jpg

i can send you pics of what they looked like in 90civicrider's civic

you have aim, yahoo, or msn???

http://www.jazzproparts.com/photos/AVID%20AC%20MM%20001-2.jpg

i can send you pics of what they looked like in 90civicrider's civic
[email protected] (im)SiR92

i sent pics. i have trillian, which has AIM...it says you are not online :thumbsdow

mine is LadyNRedSi, you can try and im me

im about to do a ls swap into my hatch with hasport mounts, i can let you know after i finish how it turns out. most people with hasports say the vibration is pretty mean throughout the whole car

im about to do a ls swap into my hatch with hasport mounts, i can let you know after i finish how it turns out. most people with hasports say the vibration is pretty mean throughout the whole car
yeah, thats what I want to avoid. Yeah let me know how it works out.

HCP x 2 for me.....Ive had 2 sets....both fit bang on. No rubbing, no axle bind, no bad vibrations.

Best money I spent. Couldnt have been happier.

-Brad