hay all

on monday I am going to go look at a 1st gen talon.
I is not a turbo anything so there are some things that have my consern
cause if I were to get the car I think I would want to turbo it, now if I did put a turbo kit on it then would I have to change pistons or anything what I am trying to say is would there be anything that I would have to do other then jsut put on the kit and go?
thanks
Ben :confused:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33742&item=7989026367

get a turbo car to begin with. nobody has EVER made a turbo n/a cheaper than buying a turbo car to date.

hay trust me I have been looking all over it is not like they are all over the place.
I would buy on the internet but the always seem to be in like new york or somewhere like that so getting a dsm turbo is almost out of the qestion
so do you think it is a good set or not?

If you want a turbo dsm bad enough, you will go to any length to find one. I searched for months for a gsx down here in Florida, and had no luck. So, I ended up finding one in Illinois, and had it shipped down here on a monday, and had it that thursday night, for $600! Check in your yellow book for local car shippers, so you could search outside your general area. :2cents:

ya I have seen alot that I could ship but alot of the time
it's tons of money. And you dont get to realy try it out before you buy it you now what i sayin
but mabe I should look more into that

Ya, I guess I got lucky and got it from a private dealer I found on autotrader.com. He specialized in rare and exotic cars. http://www.exotic-motors.com/ is his website. He hasn't had any gsx's since mine, but maybe you could talk to him for him to maybe find one for you.

I am in the same deal as you are with my friend. I have been helping him look for a 1g turbo. If you want one bad enough, you will look thoroughly for or wait for one. Check these sites:
www.ebay.com
www.dsmtraders.com
www.dsmtuners.com
www.autotrader.com
www.cars.com
www.carsoup.com (might work or not depending on your location)
Combined theres probably a good couple thousand ads for you to look through. Yeah it gets boring, but I have picked through every page of dsms on each of those websites everyday for a couple weeks, and its finally paying off. We found a car today that is perfect for us (1991 TSI AWD, 5 spd, 100k, needs minor work). The funny thing is we saw the ad like an hour after it was listed and emailed him right away. In return for countless hours of looking through internet classifieds, we are getting a great deal on an awesome car. I agree with JoeWagon on the turboing a N/T car... just buy one with a turbo already, its much easier and cost effective. Good luck, I hope you find what you are looking for.

thanks for all of the sites the only one that I have not tryed is the dsmtraders so I will get on that and try.
the thing is guys is that turboing a N/T car for me might
be cheeper because I can get a realy nice 2g for like $2500 and then if this turbo kit is any good or the others on ebay then i could add a turbo for like 500 to 600 dollars. so I dont know I will go look at the car today and if it is no good then I will go look at another one that this guy at a dillership found for me
thanks alot guys

thanks for all of the sites the only one that I have not tryed is the dsmtraders so I will get on that and try.
the thing is guys is that turboing a N/T car for me might
be cheeper because I can get a realy nice 2g for like $2500 and then if this turbo kit is any good or the others on ebay then i could add a turbo for like 500 to 600 dollars. so I dont know I will go look at the car today and if it is no good then I will go look at another one that this guy at a dillership found for me
thanks alot guys

A decent turbo kit will cost more than $500-600. You will need atleast $1,000 if you find all the parts yourself, and that cost dosn't include the countless house it will take to put everything together and fabricate. If you buy a decent kit alread put together for you, they cost as much as $3,000.

It might be beneficial for you to read this thread.....

http://www.automotiveforums.com/vbulletin/showthread.php?t=200222

ok then,
well I have ton of friends who have done it before and also one of them have a welder that we could use.
but what I realy need to now is, would the set that I want to buy off ebay good. there is a link at the top
so if the set is good then if would jsut cost me like $5-600. so I need someone to look at it and tell me if it is good or not. thanks

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33742&item=7989026367

ok then,
well I have ton of friends who have done it before and also one of them have a welder that we could use.
but what I realy need to now is, would the set that I want to buy off ebay good. there is a link at the top
so if the set is good then if would jsut cost me like $5-600. so I need someone to look at it and tell me if it is good or not. thanks

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33742&item=7989026367

No

Those are only the general parts that a turbo car would require. i.e. turbo, intercooler.

None of the custom fabrication shit is included with that package. That is what you need.

Look at this and compare to your shitty ebay package.

http://www.hahnracecraft.com/auto/eclipse/eclipse.htm

What part of Utah are you in. I'm in Boise Idaho. I know where there is a 1g AWD Turbo Laser and a 1g AWD Turbo Talon for sell here in town. I believe I saw 1g Turbo eclipse here as well.

That kit looks kinda shitty, i would go with a turbo car to start, just a few things that kit doesn't include: oil lines, intercooler piping, intake, or exhaust, you'd also problably need some type of fuel management, i know greddy's kit omes with an e-manage. Just get a turbo car.

I see what you guys mean. I mean that is not the only kit that I could get. this one looks a little more complete. but I do see what you guys are talking about
oh ya I am in roy ut


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33742&item=7988989757&sspagename=WDVW

Ahhh....good old SSAutoCrap.

I wouldn't buy a lightbulb from those fuckers. Stay away from them, they sell nothing but junk. Their turbos split right down the center of the housing and their tubular manafolds fall apart in a matter of weeks.

But, then again, it's your money. I just wanted to let you know what I had heard.....I think it's all over on tooners.

You need to look at kits specifically for a 420A non-turbo motor. All the kits you linked to so far are set up for the 4g63, which already has all shit you need to run a turbo setup from the factory. There are a lot of custom pieces that are required to run a turbo setup on the N/T eclipse's. Look at the link I posted earlier. That is from a company that is gaining a decent repuation on their parts and service for the 420A turbo kits. They are expensive, but they are what you will want if you want quality.

ok.
hay thanks