Spun Bearing

I recently spun a rod bearing in my zc. I pulled off the pan, sure enough there was some flakes of metal down in the bottom. so i pulled the bearing, it was definately the culprit. Anyway the crank looks fine i think i caught it early enough to save it. My question is will the standard set of ACL's work for. I understand that they are all the same size and wont be size matched to each rod like the oem's but how much of a difference will it actually make. Any help would be much appreciated, especially if anyone can speak from experience.

another zc with a spun bearing. thats the only thing i hate about zc's. happened to 2 of mine. ive replaced with just standard bearings. what you could do to really get it right though is use plasti-gauge. it tells you the clearances of each bearing so you can get the exact fit. look into it, its really cheap