ZC not sparking

I just got ready to fire my zc up and i have no spark at all. Im pretty sure all the grounds are hooked up, batterys good, although i did have to switch the cap from my old engine (d15) because the one that came on the Zc was cracked. Any ideas? DO i need a whole new dizzy?? or did i just forget something

you checked to see if you had spark? the simple stuff needs checking first.

plugs
wires
rotors
cap
coil

did you switch wires around on connector to dizzy? if so then you got the peach and white 1 i believe backwards.

There are 2 white wires in the dizzy harness. Try switching them around. I get that wrong every time.

yeah, those two white wires will always mess you up.