Zc Motor ?'s
Team PHATBOYZ
06-12-2005, 12:08 AM
i WAS WINDERING IF THE 86-87 INTEGRA ENGINE IS THE SAME AS THE 88-91 CIVIC ZC ENGINE? iS IT THE SAME, AND IF IT IS, WILL IT JUST FIT RIGHT IN AND DOES IT HAVE THE SAME HORSE POWER?
1989CivicSi
06-12-2005, 03:01 AM
similar... yes, same... no
the closest thing the
86-89 integra motors is the brown top zc
the integra motors correct me if im wrong put out under 110 hp
the black top zc's put out 130hp
The integra motor will bolt directly up, i dont even think you have to swap some wires on the distributor.
hope this helps,
-Wes
the closest thing the
86-89 integra motors is the brown top zc
the integra motors correct me if im wrong put out under 110 hp
the black top zc's put out 130hp
The integra motor will bolt directly up, i dont even think you have to swap some wires on the distributor.
hope this helps,
-Wes
Sikocivic
06-12-2005, 06:51 AM
similar... yes, same... no
the closest thing the
86-89 integra motors is the brown top zc
the integra motors correct me if im wrong put out under 110 hp
the black top zc's put out 130hp
The integra motor will bolt directly up, i dont even think you have to swap some wires on the distributor.
hope this helps,
-Wes
Wrong,Wrong!! :disappoin
The 86-89 Integra motor puts out 118 HP
The 86-89 Integra motor is NOT a ZC motor, its a D16a1.
The 86-89 Integra D16a1 will NOT bolt into a 88-91 Civic/CRX. The mounts don't even come close and the 88-91 trannys will not bolt to the D16a1 block.
The 86-87 D16a1 will fit in a 85-87 Civic/CRX that has a MPFI motor(Si)
the closest thing the
86-89 integra motors is the brown top zc
the integra motors correct me if im wrong put out under 110 hp
the black top zc's put out 130hp
The integra motor will bolt directly up, i dont even think you have to swap some wires on the distributor.
hope this helps,
-Wes
Wrong,Wrong!! :disappoin
The 86-89 Integra motor puts out 118 HP
The 86-89 Integra motor is NOT a ZC motor, its a D16a1.
The 86-89 Integra D16a1 will NOT bolt into a 88-91 Civic/CRX. The mounts don't even come close and the 88-91 trannys will not bolt to the D16a1 block.
The 86-87 D16a1 will fit in a 85-87 Civic/CRX that has a MPFI motor(Si)
91civichatch2571
06-12-2005, 11:52 AM
^^:thumbsup:
If you wanna learn more about the zc motor, heres (http://thezcr.com/forums/showthread.php?t=7334) a good source.
If you wanna learn more about the zc motor, heres (http://thezcr.com/forums/showthread.php?t=7334) a good source.
1989CivicSi
06-12-2005, 02:44 PM
i didnt say the integra was a zc, they are similar
reread the post
reread the post
1989CivicSi
06-12-2005, 02:46 PM
and the d16a1 will bolt up ITS THE SAME BLOCK AND MOUNTS ... I know this b/c i have done the swap several times, i have owned an 86 crx, 88integra 89 civic si, two 91 crx si's a 93 integra a 95 civic dx, a 93 civic dx and i have done swaps on all of them and some experitmenting wiht ls/vtec and also goint with a boosted ls
also i do swaps for people for money, i have done a total of 23 swaps up to this date
also i do swaps for people for money, i have done a total of 23 swaps up to this date
duffman868
06-13-2005, 01:15 AM
the a1 will not bolt up to the 2nd gen crx but it will bolt up to the 1st gen crx. so if you did the swapand it bolted right up than you either swapped an a1 into a 1st gen or swapped a zc from a 2nd gen teg into a 2nd gen crx
Team PHATBOYZ
06-13-2005, 01:42 AM
Alrite, thanks fellas.
Automotive Network, Inc., Copyright ©2026