his will fit

a d16a6 header will fit a d16z6 and y8 or any other d series right same for all mods wright like cams and all. the reason i ask is just because i didnt no if vtec messed anything up with the parts swap

well vtec cams wont work too well in a non vtec motor... but other than that, the rest should fit.

i don't understand what the question was.

i don't understand what the question was.

hes basicly just asking if parts from different d-series motors can be interchanged.

Ya, cams are major. As far as external stuff goes like intake/exhaust its the same.

good to know thanks guys ..

what about a clutch will a act clutch for a ex 5th gen tranny fit the 4g si tranny

No.

Cable - hydro

actually depending on the tranny, it will. i think its the 90-91 DX and Si trannys that use the sameclutch disc as the later hydo trannys. i know for a fact that the input shaft on the 88 base model is smaller than the input shaft on the 91 DX and Si, cause i tried putting a DX trans in one of my STD cars, but didnt have the cash to get another clutch disc. needless to say i had to wait until i could swing the price of the new disc.

i even used a flywheel from a 91 DX on a 98 EX once, and it bolts on the same, and the pressure plate from the EX worked too. the owner broke the ring gear off the flywheel and it made the starter just free spin the ring gear. so i put a 91 DX flywheel in it, and everything bolted up.

actually depending on the tranny, it will. i think its the 90-91 DX and Si trannys that use the sameclutch disc as the later hydo trannys. i know for a fact that the input shaft on the 88 base model is smaller than the input shaft on the 91 DX and Si, cause i tried putting a DX trans in one of my STD cars, but didnt have the cash to get another clutch disc. needless to say i had to wait until i could swing the price of the new disc.

i even used a flywheel from a 91 DX on a 98 EX once, and it bolts on the same, and the pressure plate from the EX worked too. the owner broke the ring gear off the flywheel and it made the starter just free spin the ring gear. so i put a 91 DX flywheel in it, and everything bolted up.
The 88 tranny has a different # of splines on the imput shaft. You can use that tranny on any D series motor if you use a 88-89 flywheel and a 88 disc.

You can use any 89-00 tranny on any 88-00 motor. You just have to match the clutch to the correct flywheel. So if you want to use a 92 or newer ACT clutch on a 89-91 motor and tranny just use the 92 and newer flywheel and you are good to go.

should i just but the whole ex tranny in my rex

The 92 and newer trannys are "hydro" trannys. You need to use a 88-91 "cable" tranny in your CRX.


And please learn to spell so we can understand what you are saying :banghead:

sorry that my spelling wasnt perfect for your highly anticipated post once a year !!!!!!



other then that thanks for the help

sorry that my spelling wasnt perfect for your highly anticipated post once a year !!!!!!



other then that thanks for the help
I would rather post once a year and be right, than post all the time and be wrong :smokin: