B18 SWAP Not Starting

Ok im almost done with my swap but it still wont start. I just bought a new distributior and now i have spark. I have fuel coming from the fuel line but i dont think the injectors are shooting it in. What could be the problem? I pulled out the spark plug and its bone dry so i dont think its getting fuel in the engine.

I have checked all my wiring a thousand times and i cant find anything wrong.

Could it be the ECU?

By the way this is my setup:
94 Teg engine
OBD-1 Conversion Harness
94 Teg ecu

how did you power trhe injectors ?

Double check the firing order. A lot of times when my swaps dont start its just the firing order.

after cranking the engine, pull out a couple of the spark plugs. smell them to see if you smell gas. if not, test the injectors and the wiring going to them. if you do smell gas, double check for spark and check the firing order.

any codes?

what obd1 harness did you use?

try turning the key on to the on position but don't start it and hear if you can hear the fuel pump trun on....and also try checking any fuses under by the steering wheel if any of the fuses broke or something....hope that helps...