I need help on memory wire!!!!!!
Team PHATBOYZ
05-09-2005, 10:40 PM
I install this new deck, and everything works out fine, but then i couldn't find the memory wire. So everytime i start up my car, everything in my deck gets reset. I want to know what color is it?
kris
05-09-2005, 10:55 PM
white and blue
Team PHATBOYZ
05-10-2005, 04:46 PM
Well i checked my car and it didn't have the memo wire. Only the deck had it. So what, i can't do it then.
Jos4DCivic
05-10-2005, 05:02 PM
Just run a fused wire (10amp) from yellow(memory) wire from deck to + side of battery. problem solved. works like a charm. just make sure you fuse it in case of a short or something and fuse it as close to battery as possible.
done this many of times.
GL
done this many of times.
GL
kris
05-10-2005, 06:29 PM
Your car came with it.
doug294
05-10-2005, 07:18 PM
Yeah someone had cut mine short and I had to dig to find it. It's in there just look.
Scott82
05-10-2005, 07:34 PM
you could actually run it thru the fuse box in an empty slot so that way you don't have to get a fuse holder. Just do like said above, run a wire from the batt. to the fuse panel under the dash and run from the fuse panel to the deck and then you have a new factory look alike memory wire. Just mark where you fuse it so you'll know which one it is if it blows.
bambam89lx
05-12-2005, 09:39 AM
you could always T-it into the clock memory wire.
Team PHATBOYZ
05-13-2005, 07:44 PM
I was told that the memory wire is color Yellow? So now i'm confused. Is it yellow, or blue with white?
Jos4DCivic
05-14-2005, 01:12 AM
yellow is memory. blue with white line is remote for amp.
doug294
05-14-2005, 09:04 AM
I think yellow is the aftermarket color for constant power. I thought white and blue was the stock.
kris
05-14-2005, 10:16 AM
I think yellow is the aftermarket color for constant power. I thought white and blue was the stock.
yep
yep
Automotive Network, Inc., Copyright ©2026
