VSS location
patfogle
04-05-2005, 01:23 AM
Hey all, I'm installing an aftermarket cruise control system and need to know the wire colors and locations for the tach signal and VSS signal. Thanks in advance...
SebringYves
04-05-2005, 03:07 PM
Regarding the vehicle speed sensors:
wiring colors:
left front: tan/orange (521) + tan/black (522)
right front: yellow/red (514) + yellow/black (516)
left rear: light green/red (518) + light green/black (519)
right rear: pink/red (523) + pink/black (524)
The speed ref signal is on cable: 521, 514, 519, 524
the speed sensor is sensor and a ring with teeth. Everytime a teeth is passing the sensor a electrical impulse is generated which is sended to the ABS control module. The electric impulse is in direct proportion to the rotation speed of the wheel.
wiring colors:
left front: tan/orange (521) + tan/black (522)
right front: yellow/red (514) + yellow/black (516)
left rear: light green/red (518) + light green/black (519)
right rear: pink/red (523) + pink/black (524)
The speed ref signal is on cable: 521, 514, 519, 524
the speed sensor is sensor and a ring with teeth. Everytime a teeth is passing the sensor a electrical impulse is generated which is sended to the ABS control module. The electric impulse is in direct proportion to the rotation speed of the wheel.
patfogle
04-24-2005, 10:41 PM
Okay, if there are 4 sensors where does the speedo get it's signal from? That is the wire I need, and the tach signal. The cruise kit needs both (and a vacuum source) to work properly.
miller124
09-23-2005, 11:57 AM
I am replacing a speed sensor in a 97 winstar and I am having trouble locating it. Help
Automotive Network, Inc., Copyright ©2025