Show off your mod pile

Lol, its funny how different tires can make you a whole second faster if your RWD.

Energy suspension motor mounts (polyeurethane...sp?) and i am getting a spec stage 3 clutch and lightweight flywheel soon enough

Just got this in the mail! Soo purdy and matches my car too :).
http://www.81x.com/Authors/tadryan/Y_PIPE__.jpg

I have a pile...well, a pile of sh*!...a 1986 Plymouth Horizon. Rawr...OLD Car of mine. I blew the first engine doing 65 for more than 15 minutes...anyways...back to the good stuff that everyone else has...

Energy suspension motor mounts (polyeurethane...sp?) and i am getting a spec stage 3 clutch and lightweight flywheel soon enough

Any reason why your getting a SPEC 3. I dont see any big power adders in your sig, unless this is a future mod. The SPEC stage 1 will support ~ 270 ft lbs of torque and still allows you to be able to slip the clutch. Im running the SPEC stage 3 and it bites extremely hard, but what sucks is there is either no engagement or full engagement. A perfect launch is difficult since you cant slip the clutch.

Me got Stage 5. :screwy:

Any reason why your getting a SPEC 3. I dont see any big power adders in your sig, unless this is a future mod. The SPEC stage 1 will support ~ 270 ft lbs of torque and still allows you to be able to slip the clutch. Im running the SPEC stage 3 and it bites extremely hard, but what sucks is there is either no engagement or full engagement. A perfect launch is difficult since you cant slip the clutch.


i found a broken in one for 150$, but i've been considering it and it doesn't seem like that would be the best choice, i'll prolly just go w/ a stage 1 or 2 and a flywheel, i didn't know that you couldn't slip it though...i'm not so used to 3g's everyone i know has eclipse setups and tahts all i'm used to so an ACT 2600 is all i ever thought about and they don't make them for my car

nobody asks on any mods except for whats under the engine, so i'm trying to go for everything you can't see and what you wouldn't think would be fast first, after the clutch it'll end up being brakes and junk

http://img.photobucket.com/albums/v713/KaotiKKid5/modpilecopy.jpg

here's AF's MOD PILE....

no more wheel gap! Eibachs
http://img.photobucket.com/albums/v70/LoW_KeY/springs.jpg

oh wait its in :lol2:
http://img.photobucket.com/albums/v70/LoW_KeY/radio.jpg

http://img.photobucket.com/albums/v70/LoW_KeY/cdplayer.jpg

guess thats it I play in cold weather already installed my other crap.

no more wheel gap! Eibachs
http://img.photobucket.com/albums/v70/LoW_KeY/springs.jpg

oh wait its in :lol2:
http://img.photobucket.com/albums/v70/LoW_KeY/radio.jpg

http://img.photobucket.com/albums/v70/LoW_KeY/cdplayer.jpg

guess thats it I play in cold weather already installed my other crap.
Low Key, does anyone in your hometown even race you anymore? I would think they know better by now... :lol:

few unsuspecting people :) I really need to beef the trans up next winter and the axles. At stop lights I get the normal eh 4 cylinder and fake formula decals.

few unsuspecting people :) I really need to beef the trans up next winter and the axles. At stop lights I get the normal eh 4 cylinder and fake formula decals.
You need to get out to the west coast and give Redneck a run, that would be worth seeing.

You need to get out to the west coast and give Redneck a run, that would be worth seeing.

what all does he have done, never did ask him about that or 1/4 mile times if he had any? Then saw something about him being banned :eek7: or something of that sort.

Vroom Vroom. Turbo is good. Alot more into the truck than that though.

This is the prototype truck for a turbo kit being made for the Colorado and the Sonoma. The truck is mine, but the work on the truck is being done through my uncle, and is currently thousands of miles away from me. (The truck is in Colorado.. I am currently stationed in Germany.) I have alot of hard earned Iraq-made tax free money put into this truck. ;)

http://memimage.cardomain.net/member_images/7/web/811000-811999/811544_4.jpg
http://memimage.cardomain.net/member_images/7/web/811000-811999/811544_1.jpg
http://memimage.cardomain.net/member_images/7/web/811000-811999/811544_3.jpg
http://memimage.cardomain.net/member_images/7/web/811000-811999/811544_2.jpg

I have a pile...well, a pile of sh*!...a 1986 Plymouth Horizon. Rawr...OLD Car of mine. I blew the first engine doing 65 for more than 15 minutes...anyways...back to the good stuff that everyone else has...

Why not drop a turbo common block in there and have one hell of a sleeper?

Sadly my pile isn't much of a pile. It consists of a first gen DSM BOV that has been modded to hold 30 PSI. Next to that is a Grainger valve, you might know it as a manual boost controller. After that is a polished intercooler tip from Borla. If someone want to help me they can donate some money via PayPal to help me find the rest of the exhaust!!! Anyhow, I think I am going to buy a single tip from Borla instead one with a bigger inlet and outlet. Most of the money spent on the GTC has been on gray interior trim and the new wheels and tires.

http://www.customcompmods.com/images/mod.jpg

Hey did you ever show those new wheels? I remember you asking wheather you should do breaks or wheels etc but I think I missed the pics!

Hey did you ever show those new wheels? I remember you asking wheather you should do breaks or wheels etc but I think I missed the pics!

Yeah, I had pictures up a while back, I'll post them up again for you. Once I get the elctrical problem I'm having fixed I'll get some better pics.

http://www.customcompmods.com/images/1.jpg

http://www.customcompmods.com/images/2.jpg

http://www.customcompmods.com/images/3.jpg

http://www.customcompmods.com/images/4.jpg

what all does he have done, never did ask him about that or 1/4 mile times if he had any? Then saw something about him being banned :eek7: or something of that sort.
Well if I'm on top of things, he swapped a SR20DET into his '72 Datsun 240z with all the basic bolt-ons and a boost controller. I think he dyno'ed around 230-240whp, and when considering the weight of his vehicle, its probly deep into the 12's. It would be great to see you two go at it...and as for the banned thing...no worries, I'm sure it will all work itself out.

If we are talking about redneck, he dyno'd at 252 whp...he says low 13 to high 12 is his guess.

i think i have a stock heatshield in my garage lol.

i get a part... it goes in my car. there aint that much down time.

uhhhh.... factory 6 cd disc changer from GTS eclipse, being shipped as we speak, motor mounts are on hold until sunday

An update.....
Little bit clearer of a pic. Plastic bag looking thing by the timing chain is an LS6 ported oil pump.
I will take another pic next Monday, when this table will probably be doubled.
Magnaflow 3" catback is on the floor behind the table.
http://home.comcast.net/~mrluos/Marchpile.JPG

Another update........

http://home.comcast.net/~mrluos/TB4.JPG
http://home.comcast.net/~mrluos/Marchpile2.JPG


Added the ported and polished throttle body, Kooks 1 7/8" headers, and silver fuel rails.

My parents have that table in their living room. haha.

Well, I could add 7 quarts of Valvoline VR1 50 weight Racing Oil and an AC Filter that I THINK will fit to the pile, lol (well, the new belts are done and installed, so I guess this is a new pile, lol) since you got a two AC filters on display!


And in a week or two (or three, lol), either some Goodyear Eagle Dragway Special 31x14 D-5 Compound Slicks or some Mickey Thompson ET Drag Slicks 31x13 in size M5 compound.

since you got a two AC filters on display!
And neither of them go to the Trans Am. :icon16:

And neither of them go to the Trans Am. :icon16:

LOL. Well then! :confused:

They go to his butt...huh huh huh, huh huh huh...that was cool.

my parents also have that table, sweet ramen too Mr. Luos, i have some of that waiting for the install on my car as well

LOL. Well then! :confused:
Changing the oil on my daily driver today, and then soon enough the oil on the girl's Saturn. Those two filters will be gone on the next update!! :icon16:

say luos if you happen to have any extra parts laying around feel free to ship them to me, ill even let you pay shipping, seriously though dont you have a ls6 cam laying around

say luos if you happen to have any extra parts laying around feel free to ship them to me, ill even let you pay shipping, seriously though dont you have a ls6 cam laying around
Not an LS6 cam.

I will have a 226/234 554/575 112 LSA Lunati grind sitting around here soon enough. The one that is in my current motor. Good nitrous cam.
Probably let that go for $240.