Four wheel drive isn't working

Just recently acquired an '88 full size bronco with push button 4x4. The switch has power in and out and there is a definitive click in the dash. Heard that there is a motor that engages the 4x4. Is this motor bad, and ho do you remove it?

There's a motor inside the Transfer Case.

http://www.automotiveforums.com/vbulletin/showthread.php?t=352403

A little searching does it's share of good.

I hope this helps.

Just recently acquired an '88 full size bronco with push button 4x4. The switch has power in and out and there is a definitive click in the dash. Heard that there is a motor that engages the 4x4. Is this motor bad, and ho do you remove it?
Hey! I have a 1992 Bronco,and it acted the same way. I took a hammer and tapped on the side of the motor. Then it started working. I did it probably once a year, for 2 years. Now it has been working ever since. good luck!

make sure the fuse is good to start off with.there is a reset button on the passenger kick panel it will be the wire connection with the 2 wires on each side..?looks like a small module.?

have you found the problem yet? Also, mine does the same thing but only when it's very cold out and after 5 or 6 tries, it will eventually engage depending on how cold the weather is. Have you tried it in warmer weather.