Motor Swap Question?

Well heres the deal.. I got this 90 Si and the goober that got the car before me must have really "F"ed up the engine pritty good so he drops a DX motor in it. Ok, I can deal.. So I start looking for a Acura Integra Type-R motor for it and I find one but I dont have the time to put my car under the knife.. What do you suggest.. Go with the original or is there something better down the road?

Let me know what you think..

MaX

i dont remember what the engine was in those things, the D16A6 like i have? anywho, if you want more power up top, go b-series. If you want something easier to swap in, go D series. Really depends on preference and how much power you're going for. But there's definitely better engines to choose from than the original

Its the D16B2 that is in there right now.. I want more HP but I dont what to have to cut the crap out of my car to get the motor to fit.

Hey IcE you mind if I add you to my AIM buddy list?.. Let me know man.

MaX

no problemo, not on AIM much though - prolly better to email me :) you know what my email is?

I want more HP but I dont what to have to cut the crap out of my car to get the motor to fit.

What exactly do you mean?

If it is DX it is a d15b2

I assume that it has the Si MPFI still?

Then you have about 102hp 96f#

The D16a6 (stock Si) is 108hp 100f#

For ease you can get a SOHC ZC (drop in and go) cheap and it will have about 120hp

Otherwise you are running wires (VTEC and OBD1)
Or getting DOHC ZC or integra motors and you will need more parts, not cutting the car tho..

Its a SOHC but im looking to go DOHC. Any suggested sites.. IcE whats your email? I tell you what just email me with it.. [email protected]

thanks man..

MaX

Just from experience don't go ZC, to hard to find parts for when stuff goes wrong. I went from a DX auto to a ZC standard and regret it wished I would've put a B16 in instead.

go with a d series either d15 v-tec or d16 just get a p28 ecu an obd-1 to obd-0 harness an wire v-tec in

Thanks man