zc headaces !!!!!! ecu problems

I SWAPED A dohc zc in my 91 civic dx dual point...

Which ECU would work best???... I"M now using a 89 integra auto>>AND it runs kind of crapy..

that ecu should be fine...
what ecu codes do you have...if any?

I"M not the engine dork.. I do bodykits and shit...

I have no clue..

Also today i was trying to ajust my idle speed and i guess i put it to low and the car died..
I tried to start it and it wouldnt turn over and my check engine light came on??????


Any ideas????????

Could i reset the ECU would that fix it..........

I use the pm6 with my ZC and it runs... or ran nicely.

I use the pm6 with my ZC and it runs... or ran nicely.


I'm using the same one.... Mabye its the engine....

no; if you are running a PG7(88-89 teg) Auto and you car is a five speed it is going like shit. i have had a PM6(88-91si) in my car and it ran fine, know i have a PG7 and it runs great.

no; if you are running a PG7(88-89 teg) Auto and you car is a five speed it is going like shit. i have had a PM6(88-91si) in my car and it ran fine, know i have a PG7 and it runs great.

I have a AUTO and is a PR4.... IS that bad??? ITs hard to find i auto 4 a zc....Which one i need to use?

no; if you are running a PG7(88-89 teg) Auto and you car is a five speed it is going like shit. i have had a PM6(88-91si) in my car and it ran fine, know i have a PG7 and it runs great.
dont the 88-89 tegs use a lock up torque converter to shift instead of the ecu?

it'd help if you told us how it runs "cappy".

did you check all your wiring for MPFI?

is ur car standard or automatic? if its automatic then use an auto ECU. either a PM6 Auto, PG7 auto or PR4 auto. it should work fine. check the codes on ur ecu by counting the number of times it flashes consecutively without stopping/pausing. if it flashes 5 times. its a code 5. 9 times=code 9 etc... just keep counting because u may have more then one code. also, check the mpfi wiring and make sure u have the right plugs going to the right things.