egr valve
viridion
07-15-2004, 03:19 AM
my ls started idling higher than normal (erratic between 1000 and 1500) and the ecu threw the code for the EGR.
now.. i never hooked the EGR up with any wiring or vacuum and have put nearly 10k miles on the engine in the civic.
how does the EGR work?
how could the ecu throw a code if it was never hooked up.. could the ecu finally have recognized the problem and is trying to compensate?
how do i hook it up vacuum wise.. i hooked a vacuum line from my intake mani up to it and the engine idled down but lost all of it's low end.. ran choppy when accelerating.. only in 2-3k RPM over 3k felt ok
there's a 3 wire plug from it, if i used the DX harness for MFPI swap will i have to wire teh EGR directly to the ecu? the EGR is mounted on the intake mani and i don't have the part that mounts to the firewall.
it's a 90 head and ecu.
now.. i never hooked the EGR up with any wiring or vacuum and have put nearly 10k miles on the engine in the civic.
how does the EGR work?
how could the ecu throw a code if it was never hooked up.. could the ecu finally have recognized the problem and is trying to compensate?
how do i hook it up vacuum wise.. i hooked a vacuum line from my intake mani up to it and the engine idled down but lost all of it's low end.. ran choppy when accelerating.. only in 2-3k RPM over 3k felt ok
there's a 3 wire plug from it, if i used the DX harness for MFPI swap will i have to wire teh EGR directly to the ecu? the EGR is mounted on the intake mani and i don't have the part that mounts to the firewall.
it's a 90 head and ecu.
nemo_wolf
07-15-2004, 12:31 PM
well i have an egr valve and i dont think a damn thing is connected to it. it might have just gone bad or something though. how bout a pic to see this egr valve, maybe i can check it against what i have and compare.
Automotive Network, Inc., Copyright ©2026