SERIOUSLYoff topic thread PART TROIS...minus postwhores!

ouch, that's not good, i'm used to alot of pain since i skateboard everyday. haha. anyway....i just installed a remote start system on my car! its so cool. i can also flash and turn on my headlights with the transmittor, and i can honk the horn and i have a panic button on it too. i just dont know which wire is the horn wire that i should hook my receiver up to. ahhhhhhhh, i dont know if i need a relay or what.

i just installed a remote start system on my car! its so cool.

If it's the kind where it starts up your car, how did you do it. I mean, I thought they were only available for like Auto's. And besides, the 89-91 has a clutch switch that only allows the car to start if the clutch is pushed in. I'm confused.

that clutch safty can be taken off.

that sucks ami, want me to send my cat over to kick its ass?

well......the clutch interlock switch can only be taken off if u close circuit the two wires that are connected to the switch. it took me forever to find the switch until i realized it was chilling just out of site on this copper rod just above the clutch arm. and yea, my auto start system is made for an automatic......any made for the manual are the exact same thing except they have some clutch bypass circuit thing along with a sensor that shuts off the car if the ebrake is disengaged. and another difference between the two is that i got mine for 30 bux and i've seen ones for manuals running around 200-300 bux. wow, haha

Where did you find one for $30 at?

word thread just hit 300 replies... most pupular thread started in this forum.

pepboys

a few days ago i was walking down the stairs when my psycho cat ran under me. somehow or another i end up slipping. i came right down on the left side of my tail bone. i caught the back of my leg and my lower back on the stair above & below. i felt like i had been hit with a baseball bat several times. i'm finally starting to feel better

doh! that sucks :(

anyone ever drank buttery nipples? Not bad at all. Not usually a mixed shot person, prefer Jack Daniels myself, but these are pretty good. You aussies probably will know it as cowbody cocksucker

i like budlight

well, been a while since i posted...it's funny..i'm looking at what my son has and i feel that i was deprived in my youth

so far i've gotten him:

razor pocket bike
thor bike gloves
cyber motorcycle helmet
and he's getting a new computer

but i figure since he's doing well in school, he deserves it.,..he's one of 5 in a class of 27 that reads well and is bring home books to read and his soccer team is #2 in his area

i wish i was ur kid! i want a friggin pocket bike hehe

Well folks... this is what 10 posts a day gets you...

Since I'm at work, my posts are going up quicker too, but damn, didn't realize that 10 posts a day could do that. And look, you joined the same time I did.

whore

thats not what you were saying last night

Guess slave was serious about not posting here anymore.

ya its been a while

stupid slave

damn LHD ricer!! ... yeah I kinda miss him too.

newbies scared him away...

well it seems that the deal may be going thru with the focus...$270 a month for a year and a half...doesn't seem so bad...just needs a paint job and som decent rims

hatch?

Found out today that it's gonna cost me 181.58 cents for a tune-up. The list so far is:
- Front tranny mount
- Front Rotors
- O2 sensor
- Valve gasket/spark plug tube seals
- PCV valve

Hopefully that should make my civ happy!

yeah...zx3

lookin to get a cf hood b/c h kinda messed it up putting hood scoops on it, and on ebay they're sellin noname racing seats for $80...but shipping is $150

theres someone on ebay that sells racing seats that are no name but are real nice, comes to right at 250 shipping for two I think, put some in something a while back, I'd have to flip though my pictures to tell you what it was though.

looin at either a oem hood or this hood which is an evo style hood
http://images.andale.com/f2/121/127/10579138/1087461637349_FOCUS_00_03_EVO_HOOD.jpg

only because he has this kit on it
http://i13.ebayimg.com/01/i/02/81/55/1c_1_b.JPG
http://www.bodykits4you.com/pictures/ford/focus/focusevo-r.jpg
http://www.bodykits4you.com/pictures/ford/focus/focusevo-s.jpg

nut his side skirts and a lot of the body lines on the aide are molded in

I like it when people actually take the time to mold the parts of the body kit with the body. It looks so much cleaner. I actually saw a pic of a focus where there were no lines on the car at all, but everything was molded. It was tite!

it looked cool...but the whole job costed $900

the only thing i'm trying to do is get a hood, probably these lights
http://images.channeladvisor.com/Sell/SSProfiles/30057037/Images/00-02FfocusBlkProj_ks.jpg

and if i can find one, a decent stock looking spoiler like this
http://i16.ebayimg.com/03/i/01/a5/7d/0a_1.JPG

necause it doesn't look right with just a mid wing (which i may get molded in)...and can't forget to take it to the muffler shop to get the cat put back on at the bottom of the car (the cat is generally located in right in front of the engine..connected to what looks like a turbo manifold) and the exhaust welded because he put it on himself...

but that's about it...i have no real plans for this car...when it's payed off i may trade it in or sell it on ebay, if the wife says i can :biggrin:

Shaguar47...that tune up will have ur car runnin right...my dad has a 98 SHO and we took it for a tune-up...OMG it cost $300 and would take up to 4 hours just to change the wirers and spark-plugs :eek7:

i saw one in the paper that was cheap and told my wife about it...needless to say i ain't considering it no more

my side skirts will be molded when I get them finished, the back filler piece above the bumper is molded, the roof gutters are filled flush, and I have my body line where it fades into the fenderwell insted of going strait into it and having that awkward gap. I'v got to finsih my shit and get some pictures.

which car is this?

my back filler piece is moulded to the bumper, just havent sanded it yet, and the filler piece between the tail lights it shaved, gonna mould my skirts in when i finish them, only have the passenger side started, only have one layer of fiberglass on it so far, dunno how its gonna turn out but meh, we'll see, thinking of making a scoop for my car tho, nothing huge, just like the cam bump only it has a hole in it... and its on the passenger side of the car lol, i'm also gonna prolly make a timing belt bump too for my car :)

I was talking about my 88 hatch.

derek, it sounds too late now but if you make both sides at once its much easyer than trying to match them after one is finished. You should do like a cam bump on each side with a vent, and atleast one of them will be fuctional. heh. Symetrical is allways good.

i was thinkin of it man but the scoop needs to be towards the front more for it to be fully functional, i'm making foam mock ups of each and gonna see what i think first tho

you should just make it like the zc hood

Well, everythings coming together nice, going to have my lip buisiness up and going soon under the name of Deviant Motorsports

sux christopher reeves died

sux christopher reeves died

WHAT?

WHAT?

Didn't see my thread? http://www.automotiveforums.com/vbulletin/showthread.php?t=299304

alright...got some more info...this is that the focus has/had done to it

lost one side of his midwing on 64 :icon16:
chrome gas cap
M3 mirrors w/ LEDs
APC euro taillights SOLD
strut tower bar SOLD
FC race headder
Magnaflow cat back exhaust
FC bored throttle body SOLD
B&M short shifter
FS spark plug wires
EBC slotted/dimpled rotors
tranny is brand new with a Quaife LSD
Steeda fuel rail SOLD
AEM replica intake w/ thermal wrap, AEM filter, and injen splash guard
Mallory guages (i think one is water temp and the other one oil pressure)
17x7 ADR DTM's machine silver SOLD

http://www.imagestation.com/picture/sraid59/pbdef7ba498f2042a0102071ed51ee451/fc5efa8c.jpg
http://www.imagestation.com/picture/sraid54/p72da4702434c521971871c3cd265af36/fc841d7d.jpg
http://www.imagestation.com/picture/sraid54/p5bdb766e6b5296a48b32d013fc5651e1/fc841d7e.jpg http://www.imagestation.com/picture/sraid54/p8a246f22510dfe4b2e7d4e8f804e37e6/fc841d7f.jpg
http://www.imagestation.com/picture/sraid54/pada03830ab2ec44a060774894f5a2f7a/fc841d80.jpg http://www.imagestation.com/picture/sraid54/p2fbde2efdc902031b8871f03a8d26bae/fc841d81.jpg

sounds good, pictures are DOA though.

but like i said...the hood scoops are gone, the clear tails are gone and the rims are gone...i also thing that he put some lowering springs on and poly engine mounts

if the pics don't show up, u'll probable have to copy and paste in ur address bar

one finally showed up. Looks kinda ugly, but has alot of potential. I'm having problems with pictures showing up on my computer so it might just be me. You planning on buying it?

yeah...30k miles on motor and 28k miles on body...$5200...i know i'll have to get rid of that single wiper...but since i'm gonna be strapped for cash, i may finish priming it and get a Macco paint job...and as i mentioned b4, that CF hood and black headlights...

I'm kinda wanting to put focus headlights on my hatch. Seen it done before and it looked clean

hey, 300 pages

eww.... i think focus headlights would be way too big for a 4g.

On top of that I'm planning on having my bumpers match my car heh.

eww.... i think focus headlights would be way too big for a 4g.

agree

I've seen 6th gen civic lights on 4g civics... looks pretty smooth (focus-like without the domestic "too big" design...heehee)

i've seen a accord around here with it done

man i love this video clip :lol:

http://www.StupidVideos.com/?VideoID=793

:lol2: civicjim and slave before they got their hondas

:screwy:
http://members.tccoa.com/liquidcougar/blingbling.jpg

^ dope ass rims if they were on a SUV or some bad ass luxury ride ^

Anyways i was sooo busy workin and i finally have a few days off! SO i'm back you bitches ;)

shit, what did I shoot then?

Ha! :thefinger

anyone else have any neibors who forget to close the blinds ?

Why? What did you see?