old Classifieds only thread.

WTS: 1990 Civic HB 5-spd with AC. white.

had a bad piston, i took it apart, i have the parts to put it togeather (the piston) minus the seals (head, intake, exhaust) all that needs to be done is put it back togeather.

Condition- other than motor work- interior has a very small crack in the top of the dash, some scraches on the driver door (keymarks), everything else ment cond.

Extra shat- have a whole extra EX motor, i have a set of pistons from a D16Y8, an apline headunit, and speakers for the doors. also an extra valve cover...

$700 firm. also i have a stero stuff for sell if u want... willing to sell the sub amp, subs, and the cap in my sig. for an Xtra $400.

interested? email: [email protected] or [email protected]

dam i got my car broken into now not into the import scene nomore...but all they stole was my used 10 in speakers and my guages, and a 5 in tach.. other then that here is what i got ...


90 civic HB si -$$3,000
b16a w/ y1 lsd tranny got the motor with 40,000 miles - $1,800
port n polish b16 head, ported 99 si intake manifold done by DHracing.com - $800
less then 2500 miles on ported head
MSD system SCI control box, blaster 2 coil- $300
will throw in a new set of distributor cap and a new SS coil- $110 if price is right..
magnecor wires- $75
STR fuel rail- $100
B&M FPR- $75
B&M fuel guage-$50
4-1 DC headers- $375
n1 type r underdrive pulley- $110
custom exhaust system- $250
race cat-$80
cold air intake-$55
neuspeed 3 piece strut bars- $200
tokico illumina adjustable struts-$400
r1 coilovers-$100
MBproducts race crossmember-$300
carbonfiber hood-$400
crossdrilled/slotted rotors- $145
GSR blades with dunlop 5000- $600
its a pretty clean 90 si civic HB

interior
replica sparco seats or if u want my stock SI seats the look good too- $400
4 piece race pedals
integra center console...

total spend on this car = bout $9,500
not including new paint job that i had it done, new timing belt, alternator belt, new waterpump, new axles,new radiator less then 1000 miles on, new brake pad less then 2500 miles..

$5,700 obo

WA residents only unless willing to pay shipping

Need or want fenders for your crx? I got pairs z3 fenders that I need to get rid of, get at me [email protected]

I have a few things that I am trying to get rid of. Make me an offer. I am in Atlanta, GA. ;)

I have a OEM Steering wheel in great condition:
http://216.77.188.54/coDataImages/p/Groups/156/156106/folders/139523/980080steeringwheel.JPG

Cargo cover holders. Just need a little cleaning. That can be done :thumbup:
http://216.77.188.54/coDataImages/p/Groups/156/156106/folders/139523/980074cargocoverholder1.JPG
http://216.77.188.54/coDataImages/p/Groups/156/156106/folders/139523/980075cargocoverholder.JPG

I have 2 center pc tail reflectors. One black and one red one NO Cracks:
http://216.77.188.54/coDataImages/p/Groups/156/156106/folders/139523/980076centertailpc2.JPG
http://216.77.188.54/coDataImages/p/Groups/156/156106/folders/139523/980077centertailpc.JPG

Mud Flaps, one set is for an 88-91 Civic; the other for a 92-96 Prelude (both for front)
http://216.77.188.54/coDataImages/p/Groups/156/156106/folders/139523/980078mudflaps.JPG

I also have the center console(not pictured) and shiftboot. Just the plain one tht came in the car. I have a GSR console in it now.
http://216.77.188.54/coDataImages/p/Groups/156/156106/folders/139523/980079Shiftboot.JPG

Also I have a passenger side tail light that I can't use. It is from an 88/89 model and I need one for a 90/91. I will either sell or trade.

IM me if you need this stuff or email me: [email protected]
AIM: tesham3
MSN: [email protected]

I have a black 88 CRX Si, I need to get rid of. I have had it a while and planned on fixing it up, and such. Long story short, never got around to it.

Been told I need to get it out of the garage. It is not running (not a blown motor or anything), just has been sitting in the garage a while. Needs a battery and probabaly some minor work. It has been sitting for about 7 months now, or so.

It would need a new passenger fender and front bumper, as previous owner bumped into something. Overall I would rate the condition 6/10. If it didnt have the front damage i would rate maybe an 8.

I can send you pictures and such, on request.

Car is located near Clemson South Carolina.

E-mail me at

[email protected]


Thanks
Lewtz

http://images.cardomain.com/member_images/9/web/273000-273999/273190_155_full.jpg
$35 + shipping

http://images.cardomain.com/member_images/9/web/273000-273999/273190_154_full.jpg
$40 + shipping (82k mi)

http://images.cardomain.com/member_images/9/web/273000-273999/273190_156_full.jpg
http://images.cardomain.com/member_images/9/web/273000-273999/273190_157_full.jpg
$125+shipping (88 Si trans, 21 spline)

http://images.cardomain.com/member_images/9/web/273000-273999/273190_158_full.jpg
http://images.cardomain.com/member_images/9/web/273000-273999/273190_159_full.jpg
$20 + shipping 1 broken stud

Make offers if you dont like the prices, make your offers $xx + shipping and calculate your own shipping cost (zip 52404) to make offers accordingly. i respond fastest to email ([email protected]) or AIM ( "krustindumm" )

Someone make me an offer, clean set of SiR tails....no cracks, very few MINOR scratches, great condition. Missing vtec logo. NEED TO SELL, baby on the way.

Send offers to:

[email protected]

anyone got a running hatch that they want to get rid of cheap that runs good!
i want a daily driver, my truck is getting too much money spent on it, to let idiots driving hit it

FS: 4 New Fuel Injectors! $100 for all 4 + seals + shipping!

Unsure what model CRX, but I will say this to be honest about them. I put them in my 91 crx si d16a6, and I have few minor mods, exhaust, intake and the car seemed like it was getting too much fuel. So these injectors seem to have a higher flow rate than the stock crx injectors.

They have this number on them: RTN-140

I have 15 things up for sale on eBay.
Maybe something can be usefull to you. Check it all out.
http://cgi6.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=90civicrider&completed=0&sort=3&since=-1

Im selling my D16y8 mini me tubo set up. Everythin included. Main reason, ...tears...im selling the civic.....ahhhh. well i hope this setup goes to a good home. It comes with EVERYTHING, including the mini me swap, turbo manifold, vtec switch, tb, trubo manifold, etc.

Check it out

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33617&item=2473402352

highest bidder wins it!!!!

WTB: I need strut bars for the back hatch of a CRX. My 89 CRX Si 's struts do not work. I am looking for a WORKING pair. Email me at [email protected] or AIM @ Difiani if you can help me out, thanx!

Looking for the following for 91 hatch:
-WW sides and rear
-Aftermarket struts(kyb etc)
-Springs/coilovers(skunk2s mostly)
-90-91 SI ecu and dizzy

Im looking for a passenger side front lower control arm off of a hatchback. Also, I need the damper fork. They must be straight. If you have a parts hatch, let me know because mine was driven into a ditch and the allignment is f'ed up.
Im also looking for a ZC block thats in GOOD CONDITION

WTB : chrome oil filler cap, and some aftermarket, blue plug leads for a B16 also

will trade part ex for 1 set of 90-91 EDM tails (no centre piece)

WTB:sohc head for d16a6 complete preferably.

EDM tails for a 90-91 hatchback , no centre piece im afraid, offers, but trader preferable

Jim

WTB:

stock parts:
90-93 integra shift linkage
90-93 Integra Rear engine Bracket 5-speed (not auto) (not the mount)
90-91 integra alternator

aftermarket:
B-series Mounts (for 88-91 civic/crx)
Shift Linkage Conversion (if not the 90-93 teg linkage)

I need one injector, or a whole set for a b16a.

Thanks, Evan

how much are stock honda rims going for? i need some but dont want to pay killer prices like i have been seeing.

Sony Ericsson T300 Cell Phone with Camera

good condition, comes with 3 faceplates, blue and red had some minor scratches the forest green is still covered

has camera attachment with case
comes in original box with books and phone charger

$50 obo +shipping (shouldn't be too much, i doubt more than 10 probably less)


Nokia Music Stand/Speakerphone

used with Nokia 6610, will also work with The Nokia 7250i, 6800, and 6200 phones (check www.nokia.com)
like new condition, works as a speakerphone and as a radio if your phone is equipped. powers from phone charger; also chargers your phone

$30 obo +shipping

Rear stabilizer off of a 1991 Integra is being offered on eBay.
Right now, you could win it for $1.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2474922126&category=33592&sspagename=STRK%3AMESSE%3AIT&rd=1

I also have the front stabilizer/sway bar, whatever you call it, also on eBay:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33592&item=2474922618

Going cheap! Put it on your Honda!
Flunky

for sale hood off a 1990 civic HB DX, e-mail [email protected] for any questions. Will have pics tomorrow hopfuly.

im parting out a 89 Si that has been hit hard on the rear passenger side, it has chakira header, and intake, good interior, it is light blue in color

email: [email protected]

i also have 98 integra ls, 93 civic ex, 91 240sx se that i am parting out as well

For Sale:

91 CRX Si D16A6 Rebuilt Head with only about 10,000k on it. Car ran fine when I removed it, didn't burn oil. Took off to replace with a high performance head.

Head will come complete and ready to bolt on.

$75.00 plus Shipping/Handling.

EF7, car in Vancouver BC
Please go to www.jdmcanada.com.

Any questions from U.S please email at [email protected].

WTB B16 or B18 e-mail me with prices. [email protected]

I have a set of OEM side skirts off a SiR , they are in fair cond i will try and get some pics up of them soon,

Offers

wtb 4th gen 4 door
it must be a standard NO AUTOMATICS.
i want one cheap
i dont care if it runs or not
i only care that it has good rust free body and decent interior, and a/c
i live in san antonio tx
email me at [email protected]

Hi everyone, alrite Im in the UK so start ringin up those shippin companies.
Heres bits I have for sale

SIR body conversion kit - consists of SIR front bumper,
SIR front fenders,
SIR headlights,
SIR hood,
SIR sidelights - clear with orange - NOT CRX ones!
SIR vtec lips all round
wanting 400 GBP/ UK£

SIR front seats, black with red pinstripe - driver seat (left) abso. mint, passanger seat (right) torn at right hand side bolster, but mint apart from that.

Wanting 150 UK£

SIR RHD full interior in full black inc. door cards/ rear panels/ dash, the lot! - offers please.

SIR rear lights + centre panel

$180 US

SIR steering wheel, whole steering wheel minus black rear backing plate, should be same fitting from Si civic, tho im not too sure,

$80 US

SIR mirrors (white) electric mirror plate

$100 US the pair

now, please email me, dont PM me as I prob wont get it for a month,
my email is [email protected] and ill guarantee quick reply!

Thanks very much
Dave

WTB: dash out of a 90-91 civic HB not crx must not have any chips or damage I dont need the gauges, hood, or vents. Also looking for integra seats blue, black, or gray. Pm or email me

wtb 88-91 si ecu. Email me with price : [email protected]

I got a nice shape 7/10 red hood from my 91 civic hatch STD for sale i got few H emblams for the buyer big one is on as of now from 90 wagon rear looks great i'll get pics if you want them make me an offer!

Im lookin for a lightened flywheel for a 91 Hatch Si. New or used. Thanks

I need an 89' teg ECU, my SI ecu isnt giving me enough power with my ZC swap, if anyone has one LMK ASAP!!!!!!!!! thanks NLSoulja45@hotmail