Custom fiberglass console

Anyone made a custom console out of fiberglass or any other material?
If so do you have any pictures or suggestions that would help out in building one? I have a 89 Civic HB with a 91 CRX Si console installed, but it leaves a gap at the top right of the console where it meets the dash.

94-00 Teg console.. Its all you need. :boink:

good luck finding one though

So basically you want to mold it together? If you fiberglassed it shut, then repainted it, it would be very messy from all the sanding things and such. You couldnt take it out of your car, to do it, it wouldnt come out, would it? Would it fit through the door or back hatch?

Why wouldn't you be able to take it out of your car?
I'm not wanting to make the console and dash one whole piece. I just want to make a console that fits and doesn't have the gap where it meets the dash. Sorry if I led ya in the wrong direction.
The teg console is an option if you have the original metal console/dash frame for the 89 stock console, but when I bought the car it had the CRX metal console/dash frame and console in it. :(

oh i was thinking of a little crack u want patched up. Fiberglass can help you with your troubles my friend.

I made one with hardboard, fiberglass, and aluminum that i covered with vinyl. It has ferrari style shift gates :P (They can also be removed)

I'd sell it to any interested party for like $50, I made it to hold gauges, but then decided to mount them in the dash.

I'll see if i have any pics online, otherwise i'll snap some tomorrow.

That sounds pretty cool, would be interested in pictures.
Thanks

try ebay for a JDM/EDM centre console, most of the models over here in the UK, or other honda forums, im sure someone would have on somewhere mate, if u wana go custom then do it , but it seems a lot of work just because it doesnt line up, just go for the genuine parts, they always fit best :D

before vinyl:
http://images.cardomain.com/member_images/9/web/273000-273999/273190_60_full.jpg
http://images.cardomain.com/member_images/9/web/273000-273999/273190_59_full.jpg

after vinyl w/o shift gates
http://images.cardomain.com/member_images/9/web/273000-273999/273190_103_full.jpg

Like I said, $50, it needs a little finish work, but I spent ~$50 on parts (plus 2 weeks) making it (trial and error).

thats pretty cool, did you make the shift gate too?

Yeah I did, I would recomend not having a shift gate on the street, our trannies center the lever somewhat once in gear, the gate holds it over, also it slows shifts alot!

I made that one out of .030 aluminum, thicker would be recomended.

I just noticed, in the pic the gate is on wrong. There should be a larger gap between 3-4 and 5-R, than between 1-2 and 3-4.