projector w/ halo ring installation.. need help
dan18732
04-13-2004, 02:24 PM
I had just purchased sonar generation 3 projector headlights with halo rings. It came with instructions, but they were not complete. does anyone know where to wire the 2 wires for the halo ring to?
Froggysquasher
04-14-2004, 11:31 AM
to the 2 wires for the parking lights...
Tranzlogic
04-14-2004, 11:46 AM
You can wire the Halo Rings to any lighting acc...Of course there gonna ground, but as far as your 12v wires, I would splice into your park lamps as foggy stated. Just make sure you dont wire into the turn signal, which im sure you know the diff. If you wire it into the signal then of course they will only illuminate when the signal is on. make sure when you wire it up to your running lights that you make a good splice and use a good closed connecter to make the intersection and wrap them tightly in electrical tape around the connection and up and down teh wires about an inch and a half to make sure no moisture ever gets on the connected area.
dan18732
04-14-2004, 09:50 PM
Hey,
Thanks alot, I was right after all, but i wanted to atleast check with someone else that may have done it already. i'd rather do it right the first time. Thanks again.
You can wire the Halo Rings to any lighting acc...Of course there gonna ground, but as far as your 12v wires, I would splice into your park lamps as foggy stated. Just make sure you dont wire into the turn signal, which im sure you know the diff. If you wire it into the signal then of course they will only illuminate when the signal is on. make sure when you wire it up to your running lights that you make a good splice and use a good closed connecter to make the intersection and wrap them tightly in electrical tape around the connection and up and down teh wires about an inch and a half to make sure no moisture ever gets on the connected area.
Thanks alot, I was right after all, but i wanted to atleast check with someone else that may have done it already. i'd rather do it right the first time. Thanks again.
You can wire the Halo Rings to any lighting acc...Of course there gonna ground, but as far as your 12v wires, I would splice into your park lamps as foggy stated. Just make sure you dont wire into the turn signal, which im sure you know the diff. If you wire it into the signal then of course they will only illuminate when the signal is on. make sure when you wire it up to your running lights that you make a good splice and use a good closed connecter to make the intersection and wrap them tightly in electrical tape around the connection and up and down teh wires about an inch and a half to make sure no moisture ever gets on the connected area.
Tranzlogic
04-15-2004, 11:10 AM
no problom bro
Automotive Network, Inc., Copyright ©2026
