2.4 cam timing

i see this site does get a lot of action but; HAS ANYONE FOUND OUT THEIR CAM TIMING WAS OFF FROM THE FACTORY? shot in the dark
:smokin:

Hmmm........not very likely, but could be possible. If it was out even one tooth on one cam, you'd notice quite a difference in driveability!!

my dad's is a full 1-1.2 seconds slow 0-60 mph ??? you can feel torque
band start then the computer shifts and you feel it start to come on and it shifts again :screwy:

Unlikely that the cam timing is off but would not hurt to check it. You can also put a vacuum gauge on car, if cam is out vac will not be what it should at idle.

they have put 20k on in and it's out of warrenty now